Выключается Juniper SRX240 в течение нескольких минут, как становится доступна консоль. По логам видно, что греется CPU. Узнать бы почему и как исправить)?! Переустановка разных версий прошивки не помогла. Вскрытие явных проблем не выявило, вентиляторы работают, даже намного быстрее из за нагрева( Заранее спасибо!
U-Boot 1.1.6-JNPR-1.7 (Build time: May 4 2010 - 06:59:58)
SRX_240_HIGHMEM board revision major:1, minor:45, serial #: AADS1293
OCTEON CN5230R-SCP pass 2.0, Core clock: 600 MHz, DDR clock: 333 MHz (666 Mhz data rate)
DRAM: 1024 MB
Starting Memory POST...
Checking datalines... OK
Checking address lines... OK
Checking 512K memory for U-Boot... OK.
Running U-Boot CRC Test... OK.
Flash: 4 MB
USB: scanning bus for devices...
Root Hub 0: 3 USB Device(s) found
Root Hub 1: 1 USB Device(s) found
scanning bus for storage devices... 1 Storage Device(s) found
Clearing DRAM........ done
BIST check passed.
1:00:00.0 Vendor/Device ID = 0x811210b5
1:01:07.0 Vendor/Device ID = 0xc72414e4
Boot Media: nand-flash usb
Net: octeth0
POST Passed
Press SPACE to abort autoboot in 1 seconds
ELF file is 32 bit
Loading .text @ 0x8f000078 (246092 bytes)
Loading .rodata @ 0x8f03c1c4 (13940 bytes)
Loading .rodata.str1.4 @ 0x8f03f838 (16580 bytes)
Loading set_Xcommand_set @ 0x8f0438fc (104 bytes)
Loading .rodata.cst4 @ 0x8f043964 (20 bytes)
Loading .data @ 0x8f044000 (5620 bytes)
Loading .data.rel.ro @ 0x8f0455f4 (120 bytes)
Loading .data.rel @ 0x8f04566c (136 bytes)
Clearing .bss @ 0x8f0456f8 (11912 bytes)
## Starting application at 0x8f000078 ...
Consoles: U-Boot console
Found compatible API, ver. 1.7
FreeBSD/MIPS U-Boot bootstrap loader, Revision 1.7
(builder@shoth.juniper.net, Tue May 4 07:15:51 UTC 2010)
Memory: 1024MB
[0]Booting from nand-flash slice 1
Un-Protected 1 sectors
writing to flash...
Protected 1 sectors
Loading /boot/defaults/loader.conf
/kernel data=0xb15b3c+0x13464c syms=[0x4+0x8bb00+0x4+0xcac15]
Hit [Enter] to boot immediately, or space bar for command prompt.
Booting [/kernel]...
Kernel entry at 0x801000e0 ...
init regular console
Primary ICache: Sets 64 Size 128 Asso 4
Primary DCache: Sets 1 Size 128 Asso 64
Secondary DCache: Sets 512 Size 128 Asso 8
GDB: debug ports: uart
GDB: current port: uart
KDB: debugger backends: ddb gdb
KDB: current backend: ddb
kld_map_v: 0x8ff80000, kld_map_p: 0x0
Copyright (c) 1996-2015, Juniper Networks, Inc.
All rights reserved.
Copyright (c) 1992-2006 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
JUNOS 12.1X46-D35.1 #0: 2015-05-14 23:19:08 UTC
builder@dagmath.juniper.net:/volume/build/junos/12.1/service/12.1X46-D35.1/obj-octeon/junos/bsd/kernels/JSRXNLE/kernel
JUNOS 12.1X46-D35.1 #0: 2015-05-14 23:19:08 UTC
builder@dagmath.juniper.net:/volume/build/junos/12.1/service/12.1X46-D35.1/obj-octeon/junos/bsd/kernels/JSRXNLE/kernel
real memory = 1073741824 (1024MB)
avail memory = 509661184 (486MB)
FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs
Security policy loaded: JUNOS MAC/pcap (mac_pcap)
Security policy loaded: JUNOS MAC/runasnonroot (mac_runasnonroot)
netisr_init: !debug_mpsafenet, forcing maxthreads from 4 to 1
cpu0 on motherboard
: CAVIUM's OCTEON 52XX CPU Rev. 0.8 with no FPU implemented
L1 Cache: I size 32kb(128 line), D size 8kb(128 line), sixty four way.
L2 Cache: Size 512kb, 8 way
obio0 on motherboard
uart0: on obio0
uart0: console (9600,n,8,1)
twsi0 on obio0
dwc0: on obio0
usb0: on dwc0
usb0: USB revision 2.0
uhub0: vendor 0x0000 DWC OTG root hub, class 9/0, rev 2.00/1.00, addr 1
uhub0: 1 port with 1 removable, self powered
uhub1: vendor 0x0409 product 0x005a, class 9/0, rev 2.00/1.00, addr 2
uhub1: single transaction translator
uhub1: 3 ports with 2 removable, self powered
umass0: STMicroelectronics ST72682 High Speed Mode, rev 2.00/2.10, addr 3
dwc1: on obio0
usb1: on dwc1
usb1: USB revision 2.0
uhub2: vendor 0x0000 DWC OTG root hub, class 9/0, rev 2.00/1.00, addr 1
uhub2: 1 port with 1 removable, self powered
cpld0 on obio0
pcib1: on obio0
Disabling Octeon big bar support
PCIe: Waiting for port 0 to finish reset
PCIe: Port 0 link active, 2 lanes
PCIe: Waiting for port 1 to finish reset
PCIe: Port 1 link active, 1 lanes
pcib1: Initialized controller
pci0: on pcib1
pcib2: irq 0 at device 0.0 on pci0
pci1: on pcib2
pci1: at device 2.0 (no driver attached)
pci1: at device 7.0 (no driver attached)
pcib0: on obio0
pci2: on pcib0
pci2: at device 0.0 (no driver attached)
gblmem0 on obio0
octpkt0: on obio0
cfi0: on obio0
Timecounter "mips" frequency 600000000 Hz quality 0
###PCB Group initialized for udppcbgroup
###PCB Group initialized for tcppcbgroup
da0 at umass-sim0 bus 0 target 0 lun 0
da0: Removable Direct Access SCSI-2 device
da0: 40.000MB/s transfers
da0: 1000MB (2048000 512 byte sectors: 64H 32S/T 1000C)
Trying to mount root from ufs:/dev/da0s1a
MFSINIT: Initialising MFSROOT
Process-1 beginning MFSROOT initialization...
Creating MFSROOT...
/dev/md0: 20.0MB (40956 sectors) block size 16384, fragment size 2048
using 4 cylinder groups of 5.00MB, 320 blks, 640 inodes.
super-block backups (for fsck -b #) at:
32, 10272, 20512, 30752
Populating MFSROOT...
Creating symlinks...
Setting up mounts...
Continuing boot from MFSROOT...
Attaching /cf/packages/junos via /dev/mdctl...
Mounted junos package on /dev/md1...
A
Media check on da0
Automatic reboot in progress...
** /dev/da0s1a (NO WRITE)
** Last Mounted on /
** Root file system
** Phase 1 - Check Blocks and Sizes
** Phase 2 - Check Pathnames
** Phase 3 - Check Connectivity
** Phase 4 - Check Reference Counts
** Phase 5 - Check Cyl groups
155 files, 74985 used, 74541 free (45 frags, 9312 blocks, 0.0% fragmentation)
mount reload of '/' failed: Operation not supported
Verified junos signed by PackageProduction_12_1_0
Verified jboot signed by PackageProduction_12_1_0
Verified junos-12.1X46-D35.1-domestic signed by PackageProduction_12_1_0
Checking integrity of BSD labels:
s1: Passed
s2: Passed
s3: Passed
s4: Passed
** /dev/bo0s3e
FILE SYSTEM CLEAN; SKIPPING CHECKS
clean, 12424 free (16 frags, 1551 blocks, 0.1% fragmentation)
** /dev/bo0s3f
FILE SYSTEM CLEAN; SKIPPING CHECKS
clean, 171782 free (118 frags, 21458 blocks, 0.1% fragmentation)
Checking integrity of licenses:
Checking integrity of configuration:
rescue.conf.gz: No recovery data
Loading configuration ...
Time and ticks drifted too much, resetting synchronization...
mgd: commit complete
Setting initial options: .
Starting optional daemons: usbd.
Doing initial network setup:.
Initial interface configuration:
additional daemons: eventd.
Additional routing options:kern.module_path: /boot//kernel;/boot/modules -> /boot/modules;/modules/ifpfe_drv;/modules;
kld netpfe drv: ifpfed_dialer ipsec kld.
Doing additional network setup: ntpdate.
Starting final network daemons:.
setting ldconfig path: /usr/lib /opt/lib
starting standard daemons: cron.
Initial rc.mips initialization:.
Local package initialization:.
starting local daemons:set cores for group access
.
kern.securelevel: -1 -> 1
Creating JAIL MFS partition...
JAIL MFS partition created
boot.upgrade.uboot="0xBFC00000"
boot.upgrade.loader="0xBFE00000"
Boot media /dev/da0 has dual root support
** /dev/da0s2a
FILE SYSTEM CLEAN; SKIPPING CHECKS
clean, 75053 free (37 frags, 9377 blocks, 0.0% fragmentation)
Tue Aug 25 12:10:24 MSK 2015
gav@BASE> show chassis fan
Item Status RPM Measurement
SRX240 PowerSupply fan 1 OK 0 (null)
SRX240 PowerSupply fan 2 OK 0 (null)
SRX240 CPU fan 1 OK 0 (null)
SRX240 CPU fan 2 OK 0 (null)
SRX240 IO fan 1 OK 0 (null)
SRX240 IO fan 2 OK 0 (null)
ADMIN@BASE> show chassis environment
Class Item Status Measurement
Temp Routing Engine OK 33 degrees C / 91 degrees F Routing Engine CPU OK 119 degrees C / 246 degrees F
Fans SRX240 PowerSupply fan 1 OK Spinning at high speed
SRX240 PowerSupply fan 2 OK Spinning at high speed
SRX240 CPU fan 1 OK Spinning at high speed
SRX240 CPU fan 2 OK Spinning at high speed
SRX240 IO fan 1 OK Spinning at high speed
SRX240 IO fan 2 OK Spinning at high speed
Power Power Supply 0 OK
AWaiting (max 60 seconds) for system process `vnlru_mem' to stop...done
Waiting (max 60 seconds) for system process `vnlru' to stop...done
Waiting (max 60 seconds) for system process `bufdaemon' to stop...done
Waiting (max 60 seconds) for system process `syncer' to stop...
Syncing disks, vnodes remaining...0 0 0 0 done
syncing disks... All buffers synced.
Uptime: 3m55s
The operating system has halted.
Turning the system power off.
Ну если греется разобрать и проверить и в правду греется или сошел датчик с ума, просто рукой можно проверять температуру, если греется проверить радиатор, либо отошел либо термопаста прохудилась.
ADMIN@1> show chassis routing-engine
Routing Engine status:
Total memory 1024 MB Max 369 MB used ( 36 percent)
Control plane memory 544 MB Max 364 MB used ( 67 percent)
Data plane memory 480 MB Max 312 MB used ( 65 percent)
CPU utilization:
User 38 percent
Background 0 percent
Kernel 32 percent
Interrupt 0 percent
Idle 30 percent
Model RE-SRX240H
Serial ID AADS1293
Start time 2015-09-07 11:17:47 MSK
Uptime 2 minutes, 56 seconds
Last reboot reason 0x1:power cycle/failure
Load averages: 1 minute 5 minute 15 minute
10.25 2.92 1.10
ADMIN@1> show system core-dumps
/var/crash/*core*: No such file or directory
/var/tmp/*core*: No such file or directory
/var/tmp/pics/*core*: No such file or directory
/var/crash/kernel.*: No such file or directory
/tftpboot/corefiles/*core*: No such file or directory
ADMIN@1> show security flow session summary
Unicast-sessions: 4
Multicast-sessions: 0
Failed-sessions: 0
Sessions-in-use: 4
Valid sessions: 4
Pending sessions: 0
Invalidated sessions: 0
Sessions in other states: 0
Maximum-sessions: 131072
Простой
