Какой сигнал в Linux отвечает за выключение ПК?

Question

[Ю Ю]

Здравствуйте!
Помогите определить проблемное место.
После обновления мой ноутбук с OpenSUSE перестал выключаться.
Точнее, процессы завершает: клавиатура, мышь, экран - всё выключается, но питание не отключает: вентиляторы работают, светодиоды светятся.
sudo shutdown -h now

Куда смотреть?

Comments

[rPman]

OpenSUSE

?
а оно поддерживает твой ноутбук?

вполне возможно что для корректной работы ACPI на твою прошлую версию были установлены необходимые модули ядра/софт/настройки а обновление это все сбросило

[xotkot]

а если так:
systemctl poweroff
?

[xotkot]

«Пользователь удалён»,
может -P(верхний регистр) ?
-P --poweroff Power-off the machine

да и shutdown оставлен просто как интерфейс совместимости

$ shutdown --help
...
This is a compatibility interface, please use the more powerful 'systemctl reboot',
'systemctl poweroff', 'systemctl reboot' commands instead.

See the shutdown(8) man page for details.

как в принципе и poweroff

$ poweroff --help
...
This is a compatibility interface, please use the more powerful 'systemctl poweroff' command instead.

See the halt(8) man page for details.

так что проще делать уже сразу напрямую

[Viktor T2]

ACPI

[AlexVWill]

sudo poweroff не срабатывает?

[pfg21]

вполне может быть что есть ошибка кода и конкретно под твой ноутбук отправка сигнала железу ACPI на выключения машины не срабатывает. при этом возможно програмно все отлично.

проверить програмную часть:
посмотреть сислог предыдущей загрузки, в конце будет лог выключения и посмотреть что на чем тормозится.
вариант2 чуть более информативный: перейти в текстовую консоль, запустить онлайн мониторинг сислога. перейти в графику, запустить выключение компутера, после перейти в тектосвую консоль и смотреть лог выключения. фокнуть на телефон на чем запнется. и разобраться что к чему.

ну и гуглить гуглить гуглить как завещал дедшка ленин :)

[Ю Ю]

Спасибо откликнувшимся!
Попробовал. Все команды ведут к выключению ОС. Но поведение то же. Нет отключения питания ПК. Периферия вырубается и всё.
С другой стороны, режим ожидания работает. При переходе в него вентиляторы и светодиоды гаснут, т.е. аппаратно всё живое.
Вроде бы не у меня одного такое происходило:
https://www.linuxquestions.org/questions/suse-open...
https://forums.opensuse.org/t/shutdown-does-not-po...

Может быть в сриптах на выключение какой то команды не хватает.

[Viktor T2]

что пишет dmesg --level=err,warn
что пишет acpi -V или acpi -i
посмотрите

[Ю Ю]

Viktor T2,

dmesg --level=err,warn

[    0.135233] MDS CPU bug present and SMT on, data leak possible. See https://www.kernel.org/doc/html/latest/admin-guide/hw-vuln/mds.html for more details.
[    0.153989] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[    0.271616] pci 0000:01:00.0: [Firmware Bug]: disabling VPD access (can't determine size of non-standard VPD format)
[    2.804656] systemd[1]: /usr/lib/systemd/system/plymouth-start.service:15: Unit uses KillMode=none. This is unsafe, as it disables systemd's process lifecycle management for the service. Please update the service to use a safer KillMode=, such as 'mixed' or 'control-group'. Support for KillMode=none is deprecated and will eventually be removed.
[    2.890939] bbswitch: loading out-of-tree module taints kernel.
[    2.891369] bbswitch: No discrete VGA device found
[    2.978541] device-mapper: core: CONFIG_IMA_DISABLE_HTABLE is disabled. Duplicate IMA measurements will not be recorded in the IMA log.
[    7.469616] systemd-sysv-generator[518]: stat() failed on /etc/init.d/jexec, ignoring: No such file or directory
[    7.652103] systemd[1]: /usr/lib/systemd/system/plymouth-start.service:15: Unit uses KillMode=none. This is unsafe, as it disables systemd's process lifecycle management for the service. Please update the service to use a safer KillMode=, such as 'mixed' or 'control-group'. Support for KillMode=none is deprecated and will eventually be removed.
[    7.992213] bbswitch: No discrete VGA device found
[    8.985139] ACPI Warning: SystemIO range 0x0000000000000428-0x000000000000042F conflicts with OpRegion 0x0000000000000400-0x000000000000047F (\PMIO) (20230331/utaddress-204)
[    8.985153] ACPI Warning: SystemIO range 0x0000000000000540-0x000000000000054F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20230331/utaddress-204)
[    8.985160] ACPI Warning: SystemIO range 0x0000000000000530-0x000000000000053F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20230331/utaddress-204)
[    8.985167] ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20230331/utaddress-204)
[    8.985172] lpc_ich: Resource conflict(s) found affecting gpio_ich
[    9.310811] at24 7-0050: supply vcc not found, using dummy regulator
[    9.315616] at24 7-0052: supply vcc not found, using dummy regulator
[    9.718201] Support for cores revisions 0x17 and 0x18 disabled by module param allhwsupport=0. Try b43.allhwsupport=1
[    9.718209] b43: probe of bcma0:1 failed with error -524
[   15.176776] gnome-shell[1463]: memfd_create() called without MFD_EXEC or MFD_NOEXEC_SEAL set
[  126.052293] warning: `akonadi_notes_a' uses wireless extensions which will stop working for Wi-Fi 7 hardware; use nl80211

[Ю Ю]

Да вроде бы всё есть и загружается:

dmesg | grep -i acpi

[    0.000000] BIOS-e820: [mem 0x00000000bcebf000-0x00000000bcfbefff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x00000000bcfbf000-0x00000000bcffefff] ACPI data
[    0.016041] ACPI: Early table checksum verification disabled
[    0.016045] ACPI: RSDP 0x00000000000FE020 000024 (v02 LENOVO)
[    0.016051] ACPI: XSDT 0x00000000BCFFE120 000084 (v01 LENOVO CB-01    00000001      01000013)
[    0.016058] ACPI: FACP 0x00000000BCFFB000 0000F4 (v04 LENOVO CB-01    00000001 ACPI 00040000)
[    0.016065] ACPI: DSDT 0x00000000BCFEE000 00938E (v01 LENOVO CB-01    00000001 ACPI 00040000)
[    0.016070] ACPI: FACS 0x00000000BCF6E000 000040
[    0.016073] ACPI: FACS 0x00000000BCF6E000 000040
[    0.016077] ACPI: SLIC 0x00000000BCFFD000 000176 (v01 LENOVO CB-01    00000001 ACPI 00040000)
[    0.016081] ACPI: ASF! 0x00000000BCFFC000 0000A5 (v32 INSYDE HR CRB   00000001 ACPI 00040000)
[    0.016085] ACPI: HPET 0x00000000BCFFA000 000038 (v01 LENOVO CB-01    00000001 ACPI 00040000)
[    0.016089] ACPI: APIC 0x00000000BCFF9000 00008C (v02 INSYDE HR CRB   00000001 ACPI 00040000)
[    0.016093] ACPI: MCFG 0x00000000BCFF8000 00003C (v01 LENOVO CB-01    00000001 ACPI 00040000)
[    0.016097] ACPI: WDAT 0x00000000BCFED000 000224 (v01 INSYDE HR CRB   00000001 ACPI 00040000)
[    0.016101] ACPI: SSDT 0x00000000BCFEC000 0006FE (v01 INSYDE HR CRB   00001000 ACPI 00040000)
[    0.016106] ACPI: BOOT 0x00000000BCFEA000 000028 (v01 INSYDE HR CRB   00000001 ACPI 00040000)
[    0.016110] ACPI: ASPT 0x00000000BCFE7000 000034 (v07 INSYDE HR CRB   00000001 ACPI 00040000)
[    0.016114] ACPI: SSDT 0x00000000BCFE6000 000780 (v01 INSYDE HR CRB   00003000 ACPI 00040000)
[    0.016118] ACPI: SSDT 0x00000000BCFE5000 000996 (v01 INSYDE HR CRB   00003000 ACPI 00040000)
[    0.016121] ACPI: Reserving FACP table memory at [mem 0xbcffb000-0xbcffb0f3]
[    0.016123] ACPI: Reserving DSDT table memory at [mem 0xbcfee000-0xbcff738d]
[    0.016124] ACPI: Reserving FACS table memory at [mem 0xbcf6e000-0xbcf6e03f]
[    0.016125] ACPI: Reserving FACS table memory at [mem 0xbcf6e000-0xbcf6e03f]
[    0.016127] ACPI: Reserving SLIC table memory at [mem 0xbcffd000-0xbcffd175]
[    0.016128] ACPI: Reserving ASF! table memory at [mem 0xbcffc000-0xbcffc0a4]
[    0.016129] ACPI: Reserving HPET table memory at [mem 0xbcffa000-0xbcffa037]
[    0.016130] ACPI: Reserving APIC table memory at [mem 0xbcff9000-0xbcff908b]
[    0.016131] ACPI: Reserving MCFG table memory at [mem 0xbcff8000-0xbcff803b]
[    0.016132] ACPI: Reserving WDAT table memory at [mem 0xbcfed000-0xbcfed223]
[    0.016133] ACPI: Reserving SSDT table memory at [mem 0xbcfec000-0xbcfec6fd]
[    0.016134] ACPI: Reserving BOOT table memory at [mem 0xbcfea000-0xbcfea027]
[    0.016135] ACPI: Reserving ASPT table memory at [mem 0xbcfe7000-0xbcfe7033]
[    0.016136] ACPI: Reserving SSDT table memory at [mem 0xbcfe6000-0xbcfe677f]
[    0.016137] ACPI: Reserving SSDT table memory at [mem 0xbcfe5000-0xbcfe5995]
[    0.023308] ACPI: PM-Timer IO Port: 0x408
[    0.023332] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.023335] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.023340] ACPI: Using ACPI (MADT) for SMP configuration information
[    0.023342] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[    0.086240] ACPI: Core revision 20230331
[    0.151075] ACPI: PM: Registering ACPI NVS region [mem 0xbcebf000-0xbcfbefff] (1048576 bytes)
[    0.153564] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[    0.153564] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.153999] ACPI: Added _OSI(Module Device)
[    0.153999] ACPI: Added _OSI(Processor Device)
[    0.153999] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.153999] ACPI: Added _OSI(Processor Aggregator Device)
[    0.167919] ACPI: 4 ACPI AML tables successfully acquired and loaded
[    0.169055] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
[    0.170354] ACPI: Dynamic OEM Table Load:
[    0.170364] ACPI: SSDT 0xFFFF8BD60092F800 00067C (v01 PmRef  Cpu0Cst  00003001 INTL 20100121)
[    0.171217] ACPI: Dynamic OEM Table Load:
[    0.171224] ACPI: SSDT 0xFFFF8BD600C3CC00 000303 (v01 PmRef  ApIst    00003000 INTL 20100121)
[    0.171848] ACPI: Dynamic OEM Table Load:
[    0.171853] ACPI: SSDT 0xFFFF8BD600AC8400 000119 (v01 PmRef  ApCst    00003000 INTL 20100121)
[    0.173330] ACPI: EC: EC started
[    0.173331] ACPI: EC: interrupt blocked
[    0.175234] ACPI: EC: EC_CMD/EC_SC=0x66, EC_DATA=0x62
[    0.175237] ACPI: \_SB_.PCI0.LPCB.EC0_: Boot DSDT EC used to handle transactions
[    0.175240] ACPI: Interpreter enabled
[    0.175263] ACPI: PM: (supports S0 S3 S4 S5)
[    0.175265] ACPI: Using IOAPIC for interrupt routing
[    0.175869] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.176079] ACPI: watchdog: Skipping WDAT on this system because it uses RTC SRAM
[    0.176097] ACPI: Enabled 9 GPEs in block 00 to 3F
[    0.262841] ACPI: \_TZ_.FN00: New power resource
[    0.262946] ACPI: \_TZ_.FN01: New power resource
[    0.263734] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
[    0.263742] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI EDR HPX-Type3]
[    0.263796] acpi PNP0A08:00: _OSC: OS requested [PCIeHotplug SHPCHotplug PME AER PCIeCapability LTR DPC]
[    0.263799] acpi PNP0A08:00: _OSC: platform willing to grant [PCIeHotplug SHPCHotplug PME AER PCIeCapability LTR DPC]
[    0.263801] acpi PNP0A08:00: _OSC: platform retains control of PCIe features (AE_ERROR)
[    0.353998] ACPI: PCI: Interrupt link LNKA configured for IRQ 4
[    0.354074] ACPI: PCI: Interrupt link LNKB configured for IRQ 10
[    0.354147] ACPI: PCI: Interrupt link LNKC configured for IRQ 0
[    0.354149] ACPI: PCI: Interrupt link LNKC disabled
[    0.354221] ACPI: PCI: Interrupt link LNKD configured for IRQ 11
[    0.354293] ACPI: PCI: Interrupt link LNKE configured for IRQ 0
[    0.354295] ACPI: PCI: Interrupt link LNKE disabled
[    0.354366] ACPI: PCI: Interrupt link LNKF configured for IRQ 7
[    0.354438] ACPI: PCI: Interrupt link LNKG configured for IRQ 11
[    0.354510] ACPI: PCI: Interrupt link LNKH configured for IRQ 11
[    0.354774] ACPI: EC: interrupt unblocked
[    0.354776] ACPI: EC: event unblocked
[    0.354779] ACPI: EC: EC_CMD/EC_SC=0x66, EC_DATA=0x62
[    0.354781] ACPI: EC: GPE=0x17
[    0.354783] ACPI: \_SB_.PCI0.LPCB.EC0_: Boot DSDT EC initialization complete
[    0.354785] ACPI: \_SB_.PCI0.LPCB.EC0_: EC: Used to handle transactions and events
[    0.354885] PCI: Using ACPI for IRQ routing
[    0.358691] pnp: PnP ACPI init
[    0.441013] pnp: PnP ACPI: found 7 devices
[    0.447366] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[    0.645376] ACPI: bus type drm_connector registered
[    3.331145] ACPI: bus type USB registered
[    3.552159] ACPI: battery: Slot [BAT1] (battery present)
[    5.083303] ACPI: video: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
[    5.086610] acpi device:35: registered as cooling_device4
[    8.833637] ACPI: button: Power Button [PWRB]
[    8.833990] ACPI: button: Sleep Button [SLPB]
[    8.878765] ACPI: button: Lid Switch [LID0]
[    8.883866] ACPI: AC: AC Adapter [ACAD] (on-line)
[    8.891747] ACPI: button: Power Button [PWRF]
[    8.940088] ACPI: thermal: Thermal Zone [TZ00] (0 C)
[    8.985043] ACPI: watchdog: Skipping WDAT on this system because it uses RTC SRAM
[    8.985139] ACPI Warning: SystemIO range 0x0000000000000428-0x000000000000042F conflicts with OpRegion 0x0000000000000400-0x000000000000047F (\PMIO) (20230331/utaddress-204)
[    8.985148] ACPI: OSL: Resource conflict; ACPI support missing from driver?
[    8.985153] ACPI Warning: SystemIO range 0x0000000000000540-0x000000000000054F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20230331/utaddress-204)
[    8.985159] ACPI: OSL: Resource conflict; ACPI support missing from driver?
[    8.985160] ACPI Warning: SystemIO range 0x0000000000000530-0x000000000000053F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20230331/utaddress-204)
[    8.985165] ACPI: OSL: Resource conflict; ACPI support missing from driver?
[    8.985167] ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20230331/utaddress-204)
[    8.985171] ACPI: OSL: Resource conflict; ACPI support missing from driver?
[    9.015476] ideapad_acpi VPC2004:00: Keyboard backlight control not available
[    9.025581] ideapad_acpi VPC2004:00: DYTC interface is not available
[    9.098518] ACPI: watchdog: Skipping WDAT on this system because it uses RTC SRAM

[Viktor T2]

В общем это не лечится,
проще даунгреднуть ядро и заблокировать его

[Ю Ю]

Viktor T2, Уже пробовал вернуться.
Где то в сигнале выключения проблема. Если допру, как подать сигнал на выключение питания - здорово. Второй вариант - накатывать убунту...

[Viktor T2]

Ю Ю, Попробуйте модули ядра заблокировать gpio_ich и lpc_ich
поотдельности и вместе, правда с неизвестными последствиями
blacklist lpc_ich
P.S. Я так сделал у себя - сообщения о конфликте acpi - убрал.
Но комп все равно не вырубается до конца
PS2 ICH - это Intel I/O Controller Hub
а lpc и gpio - древние интерфейсы (как-то так)

Answer 1

[va_k]

Уберите ключ -h.