У меня есть устройство (комплект из клавиатуры и мыши Microsoft Sculpt Ergonomic Desktop), часть которого почему-то распознаётся как джойстик /dev/input/js0. Это очень сильно мешает в играх, но вариант с rmmod joydev использовать не хочется, слишком радикально, не хочется гробить поддержку игровых манипуляторов как таковую. Соответственно, я хочу каким-либо образом избавиться от этого "джойстика" так, чтобы при этом больше ничего не пострадало.
Выглядит это вот так:
$ udevadm info /dev/input/js0
P: /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.5/2-1.5:1.2/input/input21/js0
N: input/js0
S: input/by-id/usb-Microsoft_Microsoft®_2.4GHz_Transceiver_v9.0-if02-kbd
S: input/by-path/pci-0000:00:1d.0-usb-0:1.5:1.2-kbd
E: DEVLINKS=/dev/input/by-id/usb-Microsoft_Microsoft®_2.4GHz_Transceiver_v9.0-if02-kbd /dev/input/by-path/pci-0000:00:1d.0-usb-0:1.5:1.2-kbd
E: DEVNAME=/dev/input/js0
E: DEVPATH=/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.5/2-1.5:1.2/input/input21/js0
E: ID_BUS=usb
E: ID_INPUT=1
E: ID_INPUT_KEY=1
E: ID_INPUT_KEYBOARD=1
E: ID_MODEL=Microsoft®_2.4GHz_Transceiver_v9.0
E: ID_MODEL_ENC=Microsoft®\x202.4GHz\x20Transceiver\x20v9.0
E: ID_MODEL_ID=07a5
E: ID_PATH=pci-0000:00:1d.0-usb-0:1.5:1.2
E: ID_PATH_TAG=pci-0000_00_1d_0-usb-0_1_5_1_2
E: ID_REVISION=0757
E: ID_SERIAL=Microsoft_Microsoft®_2.4GHz_Transceiver_v9.0
E: ID_TYPE=hid
E: ID_USB_DRIVER=usbhid
E: ID_USB_INTERFACES=:030101:030102:030000:
E: ID_USB_INTERFACE_NUM=02
E: ID_VENDOR=Microsoft
E: ID_VENDOR_ENC=Microsoft
E: ID_VENDOR_ID=045e
E: MAJOR=13
E: MINOR=0
E: SUBSYSTEM=input
E: USEC_INITIALIZED=907811523
$ udevadm info --attribute-walk /dev/input/js0
Udevadm info starts with the device specified by the devpath and then
walks up the chain of parent devices. It prints for every device
found, all possible attributes in the udev rules key format.
A rule to match, can be composed by the attributes of the device
and the attributes from one single parent device.
looking at device '/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.5/2-1.5:1.2/input/input21/js0':
KERNEL=="js0"
SUBSYSTEM=="input"
DRIVER==""
looking at parent device '/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.5/2-1.5:1.2/input/input21':
KERNELS=="input21"
SUBSYSTEMS=="input"
DRIVERS==""
ATTRS{phys}=="usb-0000:00:1d.0-1.5/input2"
ATTRS{uniq}==""
ATTRS{properties}=="0"
looking at parent device '/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.5/2-1.5:1.2':
KERNELS=="2-1.5:1.2"
SUBSYSTEMS=="usb"
DRIVERS=="usbhid"
ATTRS{bInterfaceClass}=="03"
ATTRS{bInterfaceSubClass}=="00"
ATTRS{bInterfaceProtocol}=="00"
ATTRS{bNumEndpoints}=="01"
ATTRS{supports_autosuspend}=="1"
ATTRS{bAlternateSetting}==" 0"
ATTRS{bInterfaceNumber}=="02"
looking at parent device '/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.5':
KERNELS=="2-1.5"
SUBSYSTEMS=="usb"
DRIVERS=="usb"
ATTRS{bDeviceSubClass}=="00"
ATTRS{bDeviceProtocol}=="00"
ATTRS{devpath}=="1.5"
ATTRS{idVendor}=="045e"
ATTRS{speed}=="12"
ATTRS{bNumInterfaces}==" 3"
ATTRS{bConfigurationValue}=="1"
ATTRS{bMaxPacketSize0}=="64"
ATTRS{busnum}=="2"
ATTRS{devnum}=="6"
ATTRS{configuration}==""
ATTRS{bMaxPower}=="100mA"
ATTRS{authorized}=="1"
ATTRS{bmAttributes}=="a0"
ATTRS{bNumConfigurations}=="1"
ATTRS{maxchild}=="0"
ATTRS{bcdDevice}=="0757"
ATTRS{avoid_reset_quirk}=="0"
ATTRS{quirks}=="0x0"
ATTRS{version}==" 2.00"
ATTRS{urbnum}=="26396"
ATTRS{ltm_capable}=="no"
ATTRS{manufacturer}=="Microsoft"
ATTRS{removable}=="removable"
ATTRS{idProduct}=="07a5"
ATTRS{bDeviceClass}=="00"
looking at parent device '/devices/pci0000:00/0000:00:1d.0/usb2/2-1':
KERNELS=="2-1"
SUBSYSTEMS=="usb"
DRIVERS=="usb"
ATTRS{bDeviceSubClass}=="00"
ATTRS{bDeviceProtocol}=="01"
ATTRS{devpath}=="1"
ATTRS{idVendor}=="8087"
ATTRS{speed}=="480"
ATTRS{bNumInterfaces}==" 1"
ATTRS{bConfigurationValue}=="1"
ATTRS{bMaxPacketSize0}=="64"
ATTRS{busnum}=="2"
ATTRS{devnum}=="2"
ATTRS{configuration}==""
ATTRS{bMaxPower}=="0mA"
ATTRS{authorized}=="1"
ATTRS{bmAttributes}=="e0"
ATTRS{bNumConfigurations}=="1"
ATTRS{maxchild}=="8"
ATTRS{bcdDevice}=="0000"
ATTRS{avoid_reset_quirk}=="0"
ATTRS{quirks}=="0x0"
ATTRS{version}==" 2.00"
ATTRS{urbnum}=="116"
ATTRS{ltm_capable}=="no"
ATTRS{removable}=="fixed"
ATTRS{idProduct}=="0024"
ATTRS{bDeviceClass}=="09"
looking at parent device '/devices/pci0000:00/0000:00:1d.0/usb2':
KERNELS=="usb2"
SUBSYSTEMS=="usb"
DRIVERS=="usb"
ATTRS{bDeviceSubClass}=="00"
ATTRS{bDeviceProtocol}=="00"
ATTRS{devpath}=="0"
ATTRS{idVendor}=="1d6b"
ATTRS{speed}=="480"
ATTRS{bNumInterfaces}==" 1"
ATTRS{bConfigurationValue}=="1"
ATTRS{bMaxPacketSize0}=="64"
ATTRS{authorized_default}=="1"
ATTRS{busnum}=="2"
ATTRS{devnum}=="1"
ATTRS{configuration}==""
ATTRS{bMaxPower}=="0mA"
ATTRS{authorized}=="1"
ATTRS{bmAttributes}=="e0"
ATTRS{bNumConfigurations}=="1"
ATTRS{maxchild}=="2"
ATTRS{bcdDevice}=="0313"
ATTRS{avoid_reset_quirk}=="0"
ATTRS{quirks}=="0x0"
ATTRS{serial}=="0000:00:1d.0"
ATTRS{version}==" 2.00"
ATTRS{urbnum}=="24"
ATTRS{ltm_capable}=="no"
ATTRS{manufacturer}=="Linux 3.13.0-18-generic ehci_hcd"
ATTRS{removable}=="unknown"
ATTRS{idProduct}=="0002"
ATTRS{bDeviceClass}=="09"
ATTRS{product}=="EHCI Host Controller"
looking at parent device '/devices/pci0000:00/0000:00:1d.0':
KERNELS=="0000:00:1d.0"
SUBSYSTEMS=="pci"
DRIVERS=="ehci-pci"
ATTRS{irq}=="23"
ATTRS{subsystem_vendor}=="0x1458"
ATTRS{broken_parity_status}=="0"
ATTRS{class}=="0x0c0320"
ATTRS{companion}==""
ATTRS{enabled}=="1"
ATTRS{consistent_dma_mask_bits}=="32"
ATTRS{dma_mask_bits}=="32"
ATTRS{local_cpus}=="00000000,00000000,00000000,00000000,00000000,00000000,00000000,0000000f"
ATTRS{device}=="0x1e26"
ATTRS{uframe_periodic_max}=="100"
ATTRS{msi_bus}==""
ATTRS{local_cpulist}=="0-3"
ATTRS{vendor}=="0x8086"
ATTRS{subsystem_device}=="0x5006"
ATTRS{numa_node}=="-1"
ATTRS{d3cold_allowed}=="1"
looking at parent device '/devices/pci0000:00':
KERNELS=="pci0000:00"
SUBSYSTEMS==""
DRIVERS==""
Я пытался создать файл правила такого вида:
SUBSYSTEM=="input", BUS="usb", ID_PATH="pci-0000:00:1d.0-usb-0:1.5:1.2" OPTIONS+="ignore_device"
Делаю sudo udevadm control --reload, отключаю и подключаю передатчик комплекта - не помогает. Подскажите, что я делаю не так и как мне добиться результата?
