Have you turned SNMP off on two places?
If not do as following:
1. Navigate to Start -> Devices and Printers and select the correct printer, right click and
choose “Printer Preferences”.
2. Go to the “Configuration” tab and press the “Bi-Directional Setup” button.
3. Here you can turn “Bi-Directional Communication” off.
4. You may also need to Navigate to Printer Preferences -> Ports -> Configure Port
5. And turn “SNMP Status Enabled” off there as well.
This can be turned off if the driver gives a false “Printer Offline” message.
What about disabling the ports that SNMP use?
UDP PORT 161:
The SNMP agent receives requests through this port.
UDP PORT 162:
The SNMP agent receives notifications (Traps) through this port.
Also you can try changing Protocol to LPR or RAW, if that does not work the easiest way would probably be to do a clean driver install on the server with the preferred settings.
Я и не предлагал влезать на халяву.
И потом, почему ты решил, что те деньги которые провайдер требует за подключение уйдут в никуда, я полагаю они упадут на твой лицевой счет и с них спишется абонентка.
Так может в веб интерфесе принтера есть некий раздел с расширенными настройками, где это можно сделать.
Может быть принтер надо конфигурировать с помощью некой утилиты которая шла с ним в комплекте или есть на сайте производителя...
Нет. Это действительно туннель, но внутри ничего не шифруется. Можешь взять снифер, послушать траффик и убедится в этом лично.
Технология PPPoE не подразумевает шифрования (погугли по ключевым словам" формат пакета PPPoE")
Данные внутри PPPoE туннеля будут зашифрованы только если через PPPoE туннель кто-то будет передавать УЖЕ шифрованные данные) и никак иначе.
Ок. Допустим провайдер (непонятно зачем) использует некую технологию шифрования абонентского траффика и что? Траффик будет шифрованным только внутри провайдерской сети, после того как он поканет её пределы он уже не может быть зашифрованным, впринципе никак. Иначе, как устройства за пределами сети провайдера поймут, что с этим траффиком делать он же зашифрован?
То есть траффик если и будет зашифрован, то только до бордера провайдера дальше вообще никак.
Hi, Joachim!
Have you turned SNMP off on two places?
If not do as following:
1. Navigate to Start -> Devices and Printers and select the correct printer, right click and
choose “Printer Preferences”.
2. Go to the “Configuration” tab and press the “Bi-Directional Setup” button.
3. Here you can turn “Bi-Directional Communication” off.
4. You may also need to Navigate to Printer Preferences -> Ports -> Configure Port
5. And turn “SNMP Status Enabled” off there as well.
This can be turned off if the driver gives a false “Printer Offline” message.
What about disabling the ports that SNMP use?
UDP PORT 161:
The SNMP agent receives requests through this port.
UDP PORT 162:
The SNMP agent receives notifications (Traps) through this port.
Also you can try changing Protocol to LPR or RAW, if that does not work the easiest way would probably be to do a clean driver install on the server with the preferred settings.
Best Regards
Kimzi