Добрый день! Добрые люди помогите пожалуйста как запустить X11 на старом пк. Устанавливал иксы следующей командой
sudo apt-get install --no-install-recommends xserver-xorg x11-xserver-utils xinit openbox -y
, на виртуалке всё работает на реальном железе не в какую(
Конфигурация пк H/W path Device Class Description
==================================================
system PROD00000000
/0 bus nForce
/0/0 memory 128KiB BIOS
/0/4 processor AMD Sempron(tm) Processor 2600+
/0/4/8 memory 128KiB L1 cache
/0/4/9 memory 128KiB L2 cache
/0/1a memory 768MiB System Memory
/0/1a/0 memory 256MiB DIMM
/0/1a/1 memory 512MiB DIMM
/0/100 bridge nForce3 250Gb Host Bridge
/0/100/1 bridge nForce3 250Gb LPC Bridge
/0/100/1.1 bus nForce 250Gb PCI System Management
/0/100/2 bus CK8S USB Controller
/0/100/2/1 usb2 bus OHCI PCI host controller
/0/100/2.1 bus CK8S USB Controller
/0/100/2.1/1 usb3 bus OHCI PCI host controller
/0/100/2.2 bus nForce3 EHCI USB 2.0 Controller
/0/100/2.2/1 usb1 bus EHCI Host Controller
/0/100/5 enp0s5 bridge CK8S Ethernet Controller
/0/100/6 multimedia nForce3 250Gb AC'97 Audio Controller
/0/100/8 storage CK8S Parallel ATA Controller (v2.5)
/0/100/a storage nForce3 Serial ATA Controller
/0/100/b bridge nForce3 250Gb AGP Host to PCI Bridge
/0/100/b/0 display RV350 [Radeon 9550/9600/X1050 Series]
/0/100/b/0.1 display RV350 [Radeon 9550/9600/X1050 Series] (Secondary)
/0/100/e bridge nForce3 250Gb PCI-to-PCI Bridge
/0/101 bridge K8 [Athlon64/Opteron] HyperTransport Technology Configuration
/0/102 bridge K8 [Athlon64/Opteron] Address Map
/0/103 bridge K8 [Athlon64/Opteron] DRAM Controller
/0/104 bridge K8 [Athlon64/Opteron] Miscellaneous Control
/0/1 scsi2 storage
/0/1/0.0.0 /dev/sda disk 8012MB 8GB SATA Flash D
/0/1/0.0.0/1 /dev/sda1 volume 731MiB Linux filesystem partition
/0/1/0.0.0/2 /dev/sda2 volume 6908MiB Extended partition
/0/1/0.0.0/2/5 /dev/sda5 volume 6908MiB Linux LVM Physical Volume partition
Лог ошибки из файла "/home/kiosk/.local/share/xorg/Xorg.0.log"
https://dropmefiles.com/0Ljlf 
