Настройка OpenVPN на VPS?

Question

Hidevs @Hidevs

OpenVPN

Настройка OpenVPN на VPS?

клиент не имеет доступа в интернет что где подкрутить?
соединение устанавливается ошибок не наблюдаю.
вот конфиги клиента и сервера и логи

eth0      Link encap:Ethernet  HWaddr 52:54:00:b1:2f:8b
          inet addr:185.58.207.90  Bcast:185.58.207.255  Mask:255.255.255.0
          inet6 addr: fe80::5054:ff:feb1:2f8b/64 Scope:Link
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:12109944 errors:0 dropped:0 overruns:0 frame:0
          TX packets:50587 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000
          RX bytes:755980100 (755.9 MB)  TX bytes:29636216 (29.6 MB)

lo        Link encap:Local Loopback
          inet addr:127.0.0.1  Mask:255.0.0.0
          inet6 addr: ::1/128 Scope:Host
          UP LOOPBACK RUNNING  MTU:65536  Metric:1
          RX packets:2177 errors:0 dropped:0 overruns:0 frame:0
          TX packets:2177 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:0
          RX bytes:833356 (833.3 KB)  TX bytes:833356 (833.3 KB)

tun0      Link encap:UNSPEC  HWaddr 00-00-00-00-00-00-00-00-00-00-00-00-00-00-00-00
          inet addr:10.8.0.1  P-t-P:10.8.0.1  Mask:255.255.255.0
          UP POINTOPOINT RUNNING NOARP MULTICAST  MTU:1500  Metric:1
          RX packets:1162 errors:0 dropped:0 overruns:0 frame:0
          TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:100
          RX bytes:63569 (63.5 KB)  TX bytes:0 (0.0 B)

Вопрос задан более трёх лет назад
797 просмотров

1 комментарий

Подписаться 1 Оценить 1 комментарий

Hidevs @Hidevs Автор вопроса

2015-11-16 07:14:27 ----- OpenVPN Start -----
OpenVPN core 3.0 ios armv7a thumb2 32-bit
2015-11-16 07:14:27 Keychain Cert Extraction: 1 certificate(s) found
2015-11-16 07:14:28 UNUSED OPTIONS
4 [resolv-retry] [infinite]
5 [nobind]
7 [tun-mtu-extra] [32]
8 [mssfix] [1450]
9 [persist-key]
10 [persist-tun]
17 [verb] [3]

2015-11-16 07:14:28 EVENT: RESOLVE
2015-11-16 07:14:28 LZO-ASYM init swap=0 asym=0
2015-11-16 07:14:28 Contacting 185.61.148.133:443 via TCP
2015-11-16 07:14:28 EVENT: WAIT
2015-11-16 07:14:28 SetTunnelSocket returned 1
2015-11-16 07:14:28 Connecting to 185.61.148.133:443 (185.61.148.133) via TCPv4
2015-11-16 07:14:28 EVENT: CONNECTING
2015-11-16 07:14:28 Tunnel Options:V4,dev-type tun,link-mtu 1572,tun-mtu 1500,proto TCPv4_CLIENT,comp-lzo,cipher AES-256-CBC,auth SHA256,keysize 256,key-method 2,tls-client
2015-11-16 07:14:28 Creds: Username/Password
2015-11-16 07:14:28 Peer Info:
IV_GUI_VER=net.openvpn.connect.ios 1.0.5-177
IV_VER=3.0
IV_PLAT=ios
IV_NCP=1
IV_LZO=1

2015-11-16 07:14:28 VERIFY OK: depth=1
cert. version : 3
serial number : C6:7A:CA:E3:8B:EF:1D:92
issuer name : C=LV, ST=Latvia, L=Latvia, O=AnonymousVPN, OU=Anonymous, CN=latvia.anonymousvpn.eu, ??=latvia-vpn, emailAddress=office@anonymousvpn.eu
subject name : C=LV, ST=Latvia, L=Latvia, O=AnonymousVPN, OU=Anonymous, CN=latvia.anonymousvpn.eu, ??=latvia-vpn, emailAddress=office@anonymousvpn.eu
issued on : 2014-07-23 20:38:31
expires on : 2024-07-20 20:38:31
signed using : RSA with SHA1
RSA key size : 1024 bits
basic constraints : CA=true

2015-11-16 07:14:28 VERIFY OK: depth=0
cert. version : 3
serial number : 01
issuer name : C=LV, ST=Latvia, L=Latvia, O=AnonymousVPN, OU=Anonymous, CN=latvia.anonymousvpn.eu, ??=latvia-vpn, emailAddress=office@anonymousvpn.eu
subject name : C=LV, ST=LV, L=Latvia, O=AnonymousVPN, OU=Anonymous, CN=latvia.anonymousvpn.eu, ??=latvia-vpn, emailAddress=office@anonymousvpn.eu
issued on : 2014-07-23 20:39:44
expires on : 2024-07-20 20:39:44
signed using : RSA with SHA1
RSA key size : 1024 bits
basic constraints : CA=false
cert. type : SSL Server
key usage : Digital Signature, Key Encipherment
ext key usage : TLS Web Server Authentication

2015-11-16 07:14:29 SSL Handshake: TLSv1.0/TLS-DHE-RSA-WITH-AES-256-CBC-SHA
2015-11-16 07:14:29 Session is ACTIVE
2015-11-16 07:14:29 EVENT: GET_CONFIG
2015-11-16 07:14:29 Sending PUSH_REQUEST to server...
2015-11-16 07:14:29 OPTIONS:
0 [redirect-gateway] [def1]
1 [dhcp-option] [DNS] [8.8.8.8]
2 [dhcp-option] [DNS] [8.8.4.4]
3 [route] [1.2.5.1]
4 [topology] [net30]
5 [ping] [5]
6 [ping-restart] [30]
7 [ifconfig] [1.2.5.6] [1.2.5.5]

2015-11-16 07:14:29 LZO-ASYM init swap=0 asym=0
2015-11-16 07:14:29 EVENT: ASSIGN_IP
2015-11-16 07:14:29 TunPersist: saving tun context:
Session Name: 185.61.148.133
MTU: 1500
Remote Address: 185.61.148.133
Tunnel Addresses:
1.2.5.6/30 -> 1.2.5.5 [net30]
Reroute Gateway: IPv4=1 IPv6=0 flags=[ ENABLE REROUTE_GW DEF1 IPv4 ]
Block IPv6: no
Add Routes:
Exclude Routes:
DNS Servers:
8.8.8.8
8.8.4.4
Search Domains:

2015-11-16 07:14:29 Connected via tun
2015-11-16 07:14:29 EVENT: CONNECTED freevpn@185.61.148.133:443 (185.61.148.133) via /TCPv4 on tun/1.2.5.6/
2015-11-16 07:14:29 SetStatus Connected
2015-11-16 07:19:14 TUN reset routes
2015-11-16 07:19:14 EVENT: DISCONNECTED
2015-11-16 07:19:14 Raw stats on disconnect:
BYTES_IN : 8542
BYTES_OUT : 18996
PACKETS_IN : 77
PACKETS_OUT : 184
TUN_BYTES_IN : 7733
TUN_PACKETS_IN : 114
2015-11-16 07:19:14 Performance stats on disconnect:
CPU usage (microseconds): 241003
Tunnel compression ratio (downlink): inf
Network bytes per CPU second: 114264
Tunnel bytes per CPU second: 32086
2015-11-16 07:19:14 ----- OpenVPN Stop -----
2015-11-16 21:48:45 ----- OpenVPN Start -----
OpenVPN core 3.0 ios armv7a thumb2 32-bit
2015-11-16 21:48:45 UNUSED OPTIONS
5 [resolv-retry] [infinite]
6 [nobind]
7 [persist-key]
8 [persist-tun]
10 [verb] [3]

2015-11-16 21:48:45 EVENT: RESOLVE
2015-11-16 21:48:45 Contacting 182.169.55.226:1632 via UDP
2015-11-16 21:48:45 EVENT: WAIT
2015-11-16 21:48:45 SetTunnelSocket returned 1
2015-11-16 21:48:45 Connecting to 182.169.55.226:1632 (182.169.55.226) via UDPv4
2015-11-16 21:48:45 EVENT: CONNECTING
2015-11-16 21:48:45 Tunnel Options:V4,dev-type tun,link-mtu 1557,tun-mtu 1500,proto UDPv4,cipher AES-128-CBC,auth SHA1,keysize 128,key-method 2,tls-client
2015-11-16 21:48:45 Peer Info:
IV_GUI_VER=net.openvpn.connect.ios 1.0.5-177
IV_VER=3.0
IV_PLAT=ios
IV_NCP=1

2015-11-16 21:48:46 VERIFY OK: depth=2
cert. version : 3
serial number : 02:34:56
issuer name : C=US, O=GeoTrust Inc., CN=GeoTrust Global CA
subject name : C=US, O=GeoTrust Inc., CN=GeoTrust Global CA
issued on : 2002-05-21 04:00:00
expires on : 2022-05-21 04:00:00
signed using : RSA with SHA1
RSA key size : 2048 bits
basic constraints : CA=true

2015-11-16 21:48:46 VERIFY OK: depth=1
cert. version : 3
serial number : 02:3A:77
issuer name : C=US, O=GeoTrust Inc., CN=GeoTrust Global CA
subject name : C=US, O=GeoTrust Inc., CN=RapidSSL SHA256 CA - G3
issued on : 2014-08-29 21:39:32
expires on : 2022-05-20 21:39:32
signed using : RSA with SHA-256
RSA key size : 2048 bits
basic constraints : CA=true, max_pathlen=0
key usage : Key Cert Sign, CRL Sign

2015-11-16 21:48:46 VERIFY OK: depth=0
cert. version : 3
serial number : 04:6C:5B
issuer name : C=US, O=GeoTrust Inc., CN=RapidSSL SHA256 CA - G3
subject name : OU=GT11772020, OU=See www.rapidssl.com/resources/cps (c)13, OU=Domain Control Validated - RapidSSL(R), CN=*.opengw.net
issued on : 2015-05-16 13:29:37
expires on : 2017-02-10 18:08:55
signed using : RSA with SHA-256
RSA key size : 2048 bits
basic constraints : CA=false
subject alt name : *.opengw.net, opengw.net
key usage : Digital Signature, Key Encipherment
ext key usage : TLS Web Server Authentication, TLS Web Client Authentication

2015-11-16 21:48:47 SSL Handshake: TLSv1.0/TLS-DHE-RSA-WITH-AES-256-CBC-SHA
2015-11-16 21:48:47 Session is ACTIVE
2015-11-16 21:48:47 EVENT: GET_CONFIG
2015-11-16 21:48:47 Sending PUSH_REQUEST to server...
2015-11-16 21:48:47 OPTIONS:
0 [ping] [3]
1 [ping-restart] [10]
2 [ifconfig] [10.211.1.41] [10.211.1.42]
3 [dhcp-option] [DNS] [10.211.254.254]
4 [dhcp-option] [DNS] [8.8.8.8]
5 [route-gateway] [10.211.1.42]
6 [redirect-gateway] [def1]

2015-11-16 21:48:47 EVENT: ASSIGN_IP
2015-11-16 21:48:47 TunPersist: saving tun context:
Session Name: 182.169.55.226
Remote Address: 182.169.55.226
Tunnel Addresses:
10.211.1.41/30 -> 10.211.1.42 [net30]
Reroute Gateway: IPv4=1 IPv6=0 flags=[ ENABLE REROUTE_GW DEF1 IPv4 ]
Block IPv6: no
Add Routes:
Exclude Routes:
DNS Servers:
10.211.254.254
8.8.8.8
Search Domains:

2015-11-16 21:48:47 Connected via tun
2015-11-16 21:48:47 EVENT: CONNECTED @182.169.55.226:1632 (182.169.55.226) via /UDPv4 on tun/10.211.1.41/
2015-11-16 21:48:47 SetStatus Connected
2015-11-16 21:49:05 TUN reset routes
2015-11-16 21:49:05 EVENT: DISCONNECTED
2015-11-16 21:49:06 Raw stats on disconnect:
BYTES_IN : 24517
BYTES_OUT : 11464
PACKETS_IN : 58
PACKETS_OUT : 60
TUN_BYTES_IN : 8378
TUN_BYTES_OUT : 16383
TUN_PACKETS_IN : 43
TUN_PACKETS_OUT : 39
2015-11-16 21:49:06 Performance stats on disconnect:
CPU usage (microseconds): 150188
Tunnel compression ratio (uplink): 1.36835
Tunnel compression ratio (downlink): 1.49649
Network bytes per CPU second: 239573
Tunnel bytes per CPU second: 164866
2015-11-16 21:49:06 ----- OpenVPN Stop -----
2015-11-16 21:49:24 ----- OpenVPN Start -----
OpenVPN core 3.0 ios armv7a thumb2 32-bit
2015-11-16 21:49:24 UNUSED OPTIONS
5 [resolv-retry] [infinite]
6 [nobind]
7 [persist-key]
8 [persist-tun]
10 [verb] [3]

2015-11-16 21:49:24 EVENT: RESOLVE
2015-11-16 21:49:24 Contacting 182.169.55.226:1632 via UDP
2015-11-16 21:49:24 EVENT: WAIT
2015-11-16 21:49:24 SetTunnelSocket returned 1
2015-11-16 21:49:24 Connecting to 182.169.55.226:1632 (182.169.55.226) via UDPv4
2015-11-16 21:49:25 EVENT: CONNECTING
2015-11-16 21:49:25 Tunnel Options:V4,dev-type tun,link-mtu 1557,tun-mtu 1500,proto UDPv4,cipher AES-128-CBC,auth SHA1,keysize 128,key-method 2,tls-client
2015-11-16 21:49:25 Peer Info:
IV_GUI_VER=net.openvpn.connect.ios 1.0.5-177
IV_VER=3.0
IV_PLAT=ios
IV_NCP=1

2015-11-16 21:49:25 VERIFY OK: depth=2
cert. version : 3
serial number : 02:34:56
issuer name : C=US, O=GeoTrust Inc., CN=GeoTrust Global CA
subject name : C=US, O=GeoTrust Inc., CN=GeoTrust Global CA
issued on : 2002-05-21 04:00:00
expires on : 2022-05-21 04:00:00
signed using : RSA with SHA1
RSA key size : 2048 bits
basic constraints : CA=true

2015-11-16 21:49:25 VERIFY OK: depth=1
cert. version : 3
serial number : 02:3A:77
issuer name : C=US, O=GeoTrust Inc., CN=GeoTrust Global CA
subject name : C=US, O=GeoTrust Inc., CN=RapidSSL SHA256 CA - G3
issued on : 2014-08-29 21:39:32
expires on : 2022-05-20 21:39:32
signed using : RSA with SHA-256
RSA key size : 2048 bits
basic constraints : CA=true, max_pathlen=0
key usage : Key Cert Sign, CRL Sign

2015-11-16 21:49:25 VERIFY OK: depth=0
cert. version : 3
serial number : 04:6C:5B
issuer name : C=US, O=GeoTrust Inc., CN=RapidSSL SHA256 CA - G3
subject name : OU=GT11772020, OU=See www.rapidssl.com/resources/cps (c)13, OU=Domain Control Validated - RapidSSL(R), CN=*.opengw.net
issued on : 2015-05-16 13:29:37
expires on : 2017-02-10 18:08:55
signed using : RSA with SHA-256
RSA key size : 2048 bits
basic constraints : CA=false
subject alt name : *.opengw.net, opengw.net
key usage : Digital Signature, Key Encipherment
ext key usage : TLS Web Server Authentication, TLS Web Client Authentication

2015-11-16 21:49:26 SSL Handshake: TLSv1.0/TLS-DHE-RSA-WITH-AES-256-CBC-SHA
2015-11-16 21:49:26 Session is ACTIVE
2015-11-16 21:49:26 EVENT: GET_CONFIG
2015-11-16 21:49:26 Sending PUSH_REQUEST to server...
2015-11-16 21:49:27 Sending PUSH_REQUEST to server...
2015-11-16 21:49:28 OPTIONS:
0 [ping] [3]
1 [ping-restart] [10]
2 [ifconfig] [10.211.1.13] [10.211.1.14]
3 [dhcp-option] [DNS] [10.211.254.254]
4 [dhcp-option] [DNS] [8.8.8.8]
5 [route-gateway] [10.211.1.14]
6 [redirect-gateway] [def1]

2015-11-16 21:49:28 EVENT: ASSIGN_IP
2015-11-16 21:49:28 TunPersist: saving tun context:
Session Name: 182.169.55.226
Remote Address: 182.169.55.226
Tunnel Addresses:
10.211.1.13/30 -> 10.211.1.14 [net30]
Reroute Gateway: IPv4=1 IPv6=0 flags=[ ENABLE REROUTE_GW DEF1 IPv4 ]
Block IPv6: no
Add Routes:
Exclude Routes:
DNS Servers:
10.211.254.254
8.8.8.8
Search Domains:

2015-11-16 21:49:28 Connected via tun
2015-11-16 21:49:28 EVENT: CONNECTED @182.169.55.226:1632 (182.169.55.226) via /UDPv4 on tun/10.211.1.13/
2015-11-16 21:49:28 SetStatus Connected
2015-11-16 21:53:01 TUN reset routes
2015-11-16 21:53:01 EVENT: DISCONNECTED
2015-11-16 21:53:01 Raw stats on disconnect:
BYTES_IN : 2573137
BYTES_OUT : 849461
PACKETS_IN : 3237
PACKETS_OUT : 3321
TUN_BYTES_IN : 699956
TUN_BYTES_OUT : 2426207
TUN_PACKETS_IN : 3299
TUN_PACKETS_OUT : 3155
PKTID_UDP_REPLAY_WINDOW_BACKTRACK : 2
2015-11-16 21:53:01 Performance stats on disconnect:
CPU usage (microseconds): 1537615
Tunnel compression ratio (uplink): 1.21359
Tunnel compression ratio (downlink): 1.06056
Network bytes per CPU second: 2225913
Tunnel bytes per CPU second: 2033124
2015-11-16 21:53:01 ----- OpenVPN Stop -----
2015-11-16 21:53:16 ----- OpenVPN Start -----
OpenVPN core 3.0 ios armv7a thumb2 32-bit
2015-11-16 21:53:16 UNUSED OPTIONS
8 [nobind]
10 [persist-key]
11 [persist-tun]
12 [verb] [3]

2015-11-16 21:53:16 EVENT: RESOLVE
2015-11-16 21:53:16 LZO-ASYM init swap=0 asym=0
2015-11-16 21:53:16 Contacting 46.146.235.212:12345 via UDP
2015-11-16 21:53:16 EVENT: WAIT
2015-11-16 21:53:16 SetTunnelSocket returned 1
2015-11-16 21:53:16 Connecting to 46.146.235.212:12345 (46.146.235.212) via UDPv4
2015-11-16 21:53:16 EVENT: CONNECTING
2015-11-16 21:53:16 Tunnel Options:V4,dev-type tun,link-mtu 1558,tun-mtu 1500,proto UDPv4,comp-lzo,cipher AES-128-CBC,auth SHA1,keysize 128,key-method 2,tls-client
2015-11-16 21:53:16 Peer Info:
IV_GUI_VER=net.openvpn.connect.ios 1.0.5-177
IV_VER=3.0
IV_PLAT=ios
IV_NCP=1
IV_LZO=1

2015-11-16 21:53:16 VERIFY OK: depth=1
cert. version : 3
serial number : A0:6A:30:50:B1:11:3C:6A
issuer name : C=RU, ST=Perm, L=Perm, O=OpenVPN, OU=ouou, CN=server, ??=server, emailAddress=hidevs@bk.ru
subject name : C=RU, ST=Perm, L=Perm, O=OpenVPN, OU=ouou, CN=server, ??=server, emailAddress=hidevs@bk.ru
issued on : 2014-11-22 10:48:00
expires on : 2024-11-19 10:48:00
signed using : RSA with SHA1
RSA key size : 1024 bits
basic constraints : CA=true

2015-11-16 21:53:16 VERIFY OK: depth=0
cert. version : 3
serial number : 01
issuer name : C=RU, ST=Perm, L=Perm, O=OpenVPN, OU=ouou, CN=server, ??=server, emailAddress=hidevs@bk.ru
subject name : C=RU, ST=Perm, L=Perm, O=OpenVPN, OU=ouou, CN=server, ??=server, emailAddress=hidevs@bk.ru
issued on : 2014-11-22 10:48:53
expires on : 2024-11-19 10:48:53
signed using : RSA with MD5
RSA key size : 1024 bits
basic constraints : CA=false
cert. type : SSL Server
key usage : Digital Signature, Key Encipherment
ext key usage : TLS Web Server Authentication

2015-11-16 21:53:16 SSL Handshake: TLSv1.0/TLS-DHE-RSA-WITH-AES-256-CBC-SHA
2015-11-16 21:53:16 Session is ACTIVE
2015-11-16 21:53:16 EVENT: GET_CONFIG
2015-11-16 21:53:16 Sending PUSH_REQUEST to server...
2015-11-16 21:53:16 OPTIONS:
0 [redirect-gateway] [def1]
1 [«redirect-gateway] [def1»]
2 [«dhcp-option] [DNS] [8.8.8.8»]
3 [«dhcp-option] [DNS] [8.8.4.4»]
4 [route-gateway] [10.8.0.1]
5 [topology] [subnet]
6 [ping] [10]
7 [ping-restart] [120]
8 [ifconfig] [10.8.0.2] [255.255.255.0]

2015-11-16 21:53:16 LZO-ASYM init swap=0 asym=0
2015-11-16 21:53:16 EVENT: ASSIGN_IP
2015-11-16 21:53:16 Google DNS fallback enabled
2015-11-16 21:53:16 TunPersist: saving tun context:
Session Name: 46.146.235.212
Remote Address: 46.146.235.212
Tunnel Addresses:
10.8.0.2/24 -> 10.8.0.1
Reroute Gateway: IPv4=1 IPv6=0 flags=[ ENABLE REROUTE_GW DEF1 IPv4 ]
Block IPv6: no
Add Routes:
Exclude Routes:
DNS Servers:
8.8.8.8
8.8.4.4
Search Domains:

2015-11-16 21:53:16 Connected via tun
2015-11-16 21:53:16 EVENT: CONNECTED @46.146.235.212:12345 (46.146.235.212) via /UDPv4 on tun/10.8.0.2/
2015-11-16 21:53:17 SetStatus Connected
2015-11-16 21:53:29 TUN reset routes
2015-11-16 21:53:29 EVENT: DISCONNECTED
2015-11-16 21:53:29 Raw stats on disconnect:
BYTES_IN : 10585
BYTES_OUT : 10819
PACKETS_IN : 69
PACKETS_OUT : 64
TUN_BYTES_IN : 6954
TUN_BYTES_OUT : 5624
TUN_PACKETS_IN : 26
TUN_PACKETS_OUT : 33
2015-11-16 21:53:29 Performance stats on disconnect:
CPU usage (microseconds): 156321
Tunnel compression ratio (uplink): 1.5558
Tunnel compression ratio (downlink): 1.88211
Network bytes per CPU second: 136923
Tunnel bytes per CPU second: 80462
2015-11-16 21:53:29 ----- OpenVPN Stop -----
2015-11-28 10:28:23 ----- OpenVPN Start -----
OpenVPN core 3.0 ios armv7a thumb2 32-bit
2015-11-28 10:28:23 UNUSED OPTIONS
7 [tls-client]
13 [persist-key]
14 [persisr-tun]
15 [verb] [3]

2015-11-28 10:28:23 EVENT: RESOLVE
2015-11-28 10:28:23 LZO-ASYM init swap=0 asym=0
2015-11-28 10:28:23 Contacting 185.58.207.90:1194 via UDP
2015-11-28 10:28:23 EVENT: WAIT
2015-11-28 10:28:23 SetTunnelSocket returned 1
2015-11-28 10:28:23 Connecting to hidevs.com:1194 (185.58.207.90) via UDPv4
2015-11-28 10:28:23 EVENT: CONNECTING
2015-11-28 10:28:23 Tunnel Options:V4,dev-type tun,link-mtu 1542,tun-mtu 1500,proto UDPv4,comp-lzo,keydir 1,cipher BF-CBC,auth SHA1,keysize 128,tls-auth,key-method 2,tls-client
2015-11-28 10:28:23 Peer Info:
IV_GUI_VER=net.openvpn.connect.ios 1.0.5-177
IV_VER=3.0
IV_PLAT=ios
IV_NCP=1
IV_LZO=1

2015-11-28 10:28:23 VERIFY OK: depth=1
cert. version : 3
serial number : C9:63:43:5F:30:2D:EB:2D
issuer name : C=RU, ST=Perm, L=Perm, O=Hidevs.com, OU=Hide, CN=Hidevs.com, ??=Hidevs.com, emailAddress=vs@hidevs.com
subject name : C=RU, ST=Perm, L=Perm, O=Hidevs.com, OU=Hide, CN=Hidevs.com, ??=Hidevs.com, emailAddress=vs@hidevs.com
issued on : 2015-11-27 15:33:42
expires on : 2025-11-24 15:33:42
signed using : RSA with SHA-256
RSA key size : 2048 bits
basic constraints : CA=true

2015-11-28 10:28:23 VERIFY OK: depth=0
cert. version : 3
serial number : 01
issuer name : C=RU, ST=Perm, L=Perm, O=Hidevs.com, OU=Hide, CN=Hidevs.com, ??=Hidevs.com, emailAddress=vs@hidevs.com
subject name : C=RU, ST=Perm, L=Perm, O=Hidevs.com, OU=Hide, CN=Hidevs.com server, ??=Hidevs.com, emailAddress=vs@hidevs.com
issued on : 2015-11-27 15:42:23
expires on : 2025-11-24 15:42:23
signed using : RSA with SHA-256
RSA key size : 2048 bits
basic constraints : CA=false
subject alt name : server
cert. type : SSL Server
key usage : Digital Signature, Key Encipherment
ext key usage : TLS Web Server Authentication

2015-11-28 10:28:24 SSL Handshake: TLSv1.0/TLS-DHE-RSA-WITH-AES-256-CBC-SHA
2015-11-28 10:28:24 Session is ACTIVE
2015-11-28 10:28:24 EVENT: GET_CONFIG
2015-11-28 10:28:24 Sending PUSH_REQUEST to server...
2015-11-28 10:28:24 OPTIONS:
0 [redirect-gateway] [def1]
1 [redirect-gateway] [def1]
2 [dhcp-option] [DNS] [8.8.8.8]
3 [dhcp-option] [DNS] [8.8.4.4]
4 [route-gateway] [10.8.0.1]
5 [topology] [subnet]
6 [ping] [10]
7 [ping-restart] [120]
8 [ifconfig] [10.8.0.2] [255.255.255.0]

2015-11-28 10:28:24 LZO-ASYM init swap=0 asym=0
2015-11-28 10:28:24 EVENT: ASSIGN_IP
2015-11-28 10:28:24 TunPersist: saving tun context:
Session Name: hidevs.com
Remote Address: 185.58.207.90
Tunnel Addresses:
10.8.0.2/24 -> 10.8.0.1
Reroute Gateway: IPv4=1 IPv6=0 flags=[ ENABLE REROUTE_GW DEF1 IPv4 ]
Block IPv6: no
Add Routes:
Exclude Routes:
DNS Servers:
8.8.8.8
8.8.4.4
Search Domains:

2015-11-28 10:28:24 Connected via tun
2015-11-28 10:28:24 EVENT: CONNECTED Hidevs.com:1194 (185.58.207.90) via /UDPv4 on tun/10.8.0.2/
2015-11-28 10:28:24 SetStatus Connected
2015-11-28 10:36:50 TUN reset routes
2015-11-28 10:36:50 EVENT: DISCONNECTED
2015-11-28 10:36:50 Raw stats on disconnect:
BYTES_IN : 8648
BYTES_OUT : 50776
PACKETS_IN : 93
PACKETS_OUT : 534
TUN_BYTES_IN : 28437
TUN_PACKETS_IN : 471
2015-11-28 10:36:50 Performance stats on disconnect:
CPU usage (microseconds): 733472
Tunnel compression ratio (downlink): inf
Network bytes per CPU second: 81017
Tunnel bytes per CPU second: 38770
2015-11-28 10:36:50 ----- OpenVPN Stop -----
2015-11-28 10:36:53 ----- OpenVPN Start -----
OpenVPN core 3.0 ios armv7a thumb2 32-bit
2015-11-28 10:36:53 UNUSED OPTIONS
7 [tls-client]
13 [persist-key]
14 [persisr-tun]
15 [verb] [3]

2015-11-28 10:36:53 EVENT: RESOLVE
2015-11-28 10:36:53 LZO-ASYM init swap=0 asym=0
2015-11-28 10:36:53 Contacting 185.58.207.90:1194 via UDP
2015-11-28 10:36:53 EVENT: WAIT
2015-11-28 10:36:53 SetTunnelSocket returned 1
2015-11-28 10:36:53 Connecting to hidevs.com:1194 (185.58.207.90) via UDPv4
2015-11-28 10:36:53 EVENT: CONNECTING
2015-11-28 10:36:53 Tunnel Options:V4,dev-type tun,link-mtu 1542,tun-mtu 1500,proto UDPv4,comp-lzo,keydir 1,cipher BF-CBC,auth SHA1,keysize 128,tls-auth,key-method 2,tls-client
2015-11-28 10:36:53 Peer Info:
IV_GUI_VER=net.openvpn.connect.ios 1.0.5-177
IV_VER=3.0
IV_PLAT=ios
IV_NCP=1
IV_LZO=1

2015-11-28 10:36:53 VERIFY OK: depth=1
cert. version : 3
serial number : C9:63:43:5F:30:2D:EB:2D
issuer name : C=RU, ST=Perm, L=Perm, O=Hidevs.com, OU=Hide, CN=Hidevs.com, ??=Hidevs.com, emailAddress=vs@hidevs.com
subject name : C=RU, ST=Perm, L=Perm, O=Hidevs.com, OU=Hide, CN=Hidevs.com, ??=Hidevs.com, emailAddress=vs@hidevs.com
issued on : 2015-11-27 15:33:42
expires on : 2025-11-24 15:33:42
signed using : RSA with SHA-256
RSA key size : 2048 bits
basic constraints : CA=true

2015-11-28 10:36:53 VERIFY OK: depth=0
cert. version : 3
serial number : 01
issuer name : C=RU, ST=Perm, L=Perm, O=Hidevs.com, OU=Hide, CN=Hidevs.com, ??=Hidevs.com, emailAddress=vs@hidevs.com
subject name : C=RU, ST=Perm, L=Perm, O=Hidevs.com, OU=Hide, CN=Hidevs.com server, ??=Hidevs.com, emailAddress=vs@hidevs.com
issued on : 2015-11-27 15:42:23
expires on : 2025-11-24 15:42:23
signed using : RSA with SHA-256
RSA key size : 2048 bits
basic constraints : CA=false
subject alt name : server
cert. type : SSL Server
key usage : Digital Signature, Key Encipherment
ext key usage : TLS Web Server Authentication

2015-11-28 10:36:54 SSL Handshake: TLSv1.0/TLS-DHE-RSA-WITH-AES-256-CBC-SHA
2015-11-28 10:36:54 Session is ACTIVE
2015-11-28 10:36:54 EVENT: GET_CONFIG
2015-11-28 10:36:54 Sending PUSH_REQUEST to server...
2015-11-28 10:36:54 OPTIONS:
0 [redirect-gateway] [def1]
1 [redirect-gateway] [def1]
2 [dhcp-option] [DNS] [8.8.8.8]
3 [dhcp-option] [DNS] [8.8.4.4]
4 [route-gateway] [10.8.0.1]
5 [topology] [subnet]
6 [ping] [10]
7 [ping-restart] [120]
8 [ifconfig] [10.8.0.2] [255.255.255.0]

2015-11-28 10:36:54 LZO-ASYM init swap=0 asym=0
2015-11-28 10:36:54 EVENT: ASSIGN_IP
2015-11-28 10:36:54 TunPersist: saving tun context:
Session Name: hidevs.com
Remote Address: 185.58.207.90
Tunnel Addresses:
10.8.0.2/24 -> 10.8.0.1
Reroute Gateway: IPv4=1 IPv6=0 flags=[ ENABLE REROUTE_GW DEF1 IPv4 ]
Block IPv6: no
Add Routes:
Exclude Routes:
DNS Servers:
8.8.8.8
8.8.4.4
Search Domains:

2015-11-28 10:36:54 Connected via tun
2015-11-28 10:36:54 EVENT: CONNECTED Hidevs.com:1194 (185.58.207.90) via /UDPv4 on tun/10.8.0.2/
2015-11-28 10:36:54 SetStatus Connected
2015-11-28 10:46:13 OS Event: SLEEP
2015-11-28 10:46:13 EVENT: PAUSE
2015-11-28 10:47:11 OS Event: WAKEUP
2015-11-28 10:47:14 RESUME TEST: Internet:ReachableViaWiFi/-R ------- WiFi:ReachableViaWiFi/-R ------d
2015-11-28 10:47:14 EVENT: RESUME
2015-11-28 10:47:14 EVENT: RECONNECTING
2015-11-28 10:47:14 LZO-ASYM init swap=0 asym=0
2015-11-28 10:47:14 Contacting 185.58.207.90:1194 via UDP
2015-11-28 10:47:14 EVENT: WAIT
2015-11-28 10:47:14 SetTunnelSocket returned 1
2015-11-28 10:47:14 Connecting to hidevs.com:1194 (185.58.207.90) via UDPv4
2015-11-28 10:47:14 EVENT: CONNECTING
2015-11-28 10:47:14 Tunnel Options:V4,dev-type tun,link-mtu 1542,tun-mtu 1500,proto UDPv4,comp-lzo,keydir 1,cipher BF-CBC,auth SHA1,keysize 128,tls-auth,key-method 2,tls-client
2015-11-28 10:47:14 Peer Info:
IV_GUI_VER=net.openvpn.connect.ios 1.0.5-177
IV_VER=3.0
IV_PLAT=ios
IV_NCP=1
IV_LZO=1

2015-11-28 10:47:15 VERIFY OK: depth=1
cert. version : 3
serial number : C9:63:43:5F:30:2D:EB:2D
issuer name : C=RU, ST=Perm, L=Perm, O=Hidevs.com, OU=Hide, CN=Hidevs.com, ??=Hidevs.com, emailAddress=vs@hidevs.com
subject name : C=RU, ST=Perm, L=Perm, O=Hidevs.com, OU=Hide, CN=Hidevs.com, ??=Hidevs.com, emailAddress=vs@hidevs.com
issued on : 2015-11-27 15:33:42
expires on : 2025-11-24 15:33:42
signed using : RSA with SHA-256
RSA key size : 2048 bits
basic constraints : CA=true

2015-11-28 10:47:15 VERIFY OK: depth=0
cert. version : 3
serial number : 01
issuer name : C=RU, ST=Perm, L=Perm, O=Hidevs.com, OU=Hide, CN=Hidevs.com, ??=Hidevs.com, emailAddress=vs@hidevs.com
subject name : C=RU, ST=Perm, L=Perm, O=Hidevs.com, OU=Hide, CN=Hidevs.com server, ??=Hidevs.com, emailAddress=vs@hidevs.com
issued on : 2015-11-27 15:42:23
expires on : 2025-11-24 15:42:23
signed using : RSA with SHA-256
RSA key size : 2048 bits
basic constraints : CA=false
subject alt name : server
cert. type : SSL Server
key usage : Digital Signature, Key Encipherment
ext key usage : TLS Web Server Authentication

2015-11-28 10:47:15 SSL Handshake: TLSv1.0/TLS-DHE-RSA-WITH-AES-256-CBC-SHA
2015-11-28 10:47:15 Session is ACTIVE
2015-11-28 10:47:15 EVENT: GET_CONFIG
2015-11-28 10:47:15 Sending PUSH_REQUEST to server...
2015-11-28 10:47:15 OPTIONS:
0 [redirect-gateway] [def1]
1 [redirect-gateway] [def1]
2 [dhcp-option] [DNS] [8.8.8.8]
3 [dhcp-option] [DNS] [8.8.4.4]
4 [route-gateway] [10.8.0.1]
5 [topology] [subnet]
6 [ping] [10]
7 [ping-restart] [120]
8 [ifconfig] [10.8.0.2] [255.255.255.0]

2015-11-28 10:47:15 LZO-ASYM init swap=0 asym=0
2015-11-28 10:47:15 EVENT: ASSIGN_IP
2015-11-28 10:47:15 TunPersist: saving tun context:
Session Name: hidevs.com
Remote Address: 185.58.207.90
Tunnel Addresses:
10.8.0.2/24 -> 10.8.0.1
Reroute Gateway: IPv4=1 IPv6=0 flags=[ ENABLE REROUTE_GW DEF1 IPv4 ]
Block IPv6: no
Add Routes:
Exclude Routes:
DNS Servers:
8.8.8.8
8.8.4.4
Search Domains:

2015-11-28 10:47:15 Connected via tun
2015-11-28 10:47:15 EVENT: CONNECTED Hidevs.com:1194 (185.58.207.90) via /UDPv4 on tun/10.8.0.2/
2015-11-28 10:47:15 SetStatus

Написано более трёх лет назад

Решения вопроса 1

6 комментариев

Hidevs @Hidevs Автор вопроса

Как это проверить и если надо включить?
Это в конфигурационном файле сервера нужно прописать ?

Написано более трёх лет назад
alegzz @alegzz

вывод команд:
cat /proc/sys/net/ipv4/ip_forward
iptables -L FORWARD
iptables -L -t nat

Написано более трёх лет назад
Hidevs @Hidevs Автор вопроса

root@hidevs:~# cat /proc/sys/net/ipv4/ip_forward
1

root@hidevs:~# iptables -L FORWARD
Chain FORWARD (policy ACCEPT)
target prot opt source destination

root@hidevs:~# iptables -L -t nat
Chain PREROUTING (policy ACCEPT)
target prot opt source destination

Chain INPUT (policy ACCEPT)
target prot opt source destination

Chain OUTPUT (policy ACCEPT)
target prot opt source destination

Chain POSTROUTING (policy ACCEPT)
target prot opt source destination

root@hidevs:~# netstat -tuwpan
Active Internet connections (servers and established)
Proto Recv-Q Send-Q Local Address Foreign Address State PID/Program name
tcp 0 0 185.58.207.90:1500 0.0.0.0:* LISTEN 1223/ihttpd accept
tcp 0 0 127.0.0.1:6379 0.0.0.0:* LISTEN 1251/redis-server 1
tcp 0 0 127.0.0.1:8080 0.0.0.0:* LISTEN 1421/apache2
tcp 0 0 0.0.0.0:80 0.0.0.0:* LISTEN 1225/nginx
tcp 0 0 0.0.0.0:22 0.0.0.0:* LISTEN 1816/sshd
tcp 0 0 127.0.0.1:631 0.0.0.0:* LISTEN 2036/cupsd
tcp 0 464 185.58.207.90:22 46.146.235.212:56986 ESTABLISHED 2042/2
tcp6 0 0 :::21 :::* LISTEN 1358/proftpd: (acce
tcp6 0 0 :::22 :::* LISTEN 1816/sshd
tcp6 0 0 ::1:631 :::* LISTEN 2036/cupsd
tcp6 0 0 ::1:631 ::1:43343 ESTABLISHED 2036/cupsd
tcp6 0 0 ::1:43343 ::1:631 ESTABLISHED 1174/cups-browsed
udp 0 0 0.0.0.0:631 0.0.0.0:* 1174/cups-browsed
udp 0 0 10.8.0.1:123 0.0.0.0:* 2019/ntpd
udp 0 0 185.58.207.90:123 0.0.0.0:* 2019/ntpd
udp 0 0 127.0.0.1:123 0.0.0.0:* 2019/ntpd
udp 0 0 0.0.0.0:123 0.0.0.0:* 2019/ntpd
udp 0 0 0.0.0.0:1194 0.0.0.0:* 2241/openvpn
udp 0 0 0.0.0.0:5353 0.0.0.0:* 439/avahi-daemon: r
udp 0 0 0.0.0.0:56602 0.0.0.0:* 439/avahi-daemon: r
udp6 0 0 :::56250 :::* 439/avahi-daemon: r
udp6 0 0 fe80::5054:ff:feb1::123 :::* 2019/ntpd
udp6 0 0 ::1:123 :::* 2019/ntpd
udp6 0 0 :::123 :::* 2019/ntpd
udp6 0 0 :::5353 :::* 439/avahi-daemon: r

Написано более трёх лет назад
alegzz @alegzz

iptables -t nat -A POSTROUTING -o eth0 -j MASQUERADE

Написано более трёх лет назад
alegzz @alegzz

выполнять нужно после каждой перезагрузки

Написано более трёх лет назад
Hidevs @Hidevs Автор вопроса

спасибо все заработало

Написано более трёх лет назад

Пригласить эксперта

Ответы на вопрос 2

5 комментариев

Hidevs @Hidevs Автор вопроса

адрес неправильно транслируется?
пожалуйста покажите где проблема если поняли.

Написано более трёх лет назад
Maksim @chumayu

Hidevs: Я вообще повар, просто не знакомые слова услышал думаю дай спрошу кто разбирается.
там еще было написаны такие странные слова (IPTABLES, NAT, SRC NAT)

Написано более трёх лет назад
Николай @ACCNCC

Бред! покупной vps не может быть за NAT

Написано более трёх лет назад
Maksim @chumayu

ACCNCC: Серьезно:)
Даже сути вопроса не поняли, п*здец просто :)

Написано более трёх лет назад
Николай @ACCNCC

Maksim: )))

Написано более трёх лет назад

1 комментарий

Hidevs @Hidevs Автор вопроса

#################################################
# Sample OpenVPN 2.0 config file for            #
# multi-client server.                          #
#                                               #
# This file is for the server side              #
# of a many-clients <-> one-server              #
# OpenVPN configuration.                        #
#                                               #
# OpenVPN also supports                         #
# single-machine <-> single-machine             #
# configurations (See the Examples page         #
# on the web site for more info).               #
#                                               #
# This config should work on Windows            #
# or Linux/BSD systems.  Remember on            #
# Windows to quote pathnames and use            #
# double backslashes, e.g.:                     #
# "C:\\Program Files\\OpenVPN\\config\\foo.key" #
#                                               #
# Comments are preceded with '#' or ';'         #
#################################################

# Which local IP address should OpenVPN
# listen on? (optional)
;local a.b.c.d

# Which TCP/UDP port should OpenVPN listen on?
# If you want to run multiple OpenVPN instances
# on the same machine, use a different port
# number for each one.  You will need to
# open up this port on your firewall.
port 1194

# TCP or UDP server?

proto udp

# "dev tun" will create a routed IP tunnel,
# "dev tap" will create an ethernet tunnel.
# Use "dev tap0" if you are ethernet bridging
# and have precreated a tap0 virtual interface
# and bridged it with your ethernet interface.
# If you want to control access policies
# over the VPN, you must create firewall
# rules for the the TUN/TAP interface.
# On non-Windows systems, you can give
# an explicit unit number, such as tun0.
# On Windows, use "dev-node" for this.
# On most systems, the VPN will not function
# unless you partially or fully disable
# the firewall for the TUN/TAP interface.

dev tun

# Windows needs the TAP-Win32 adapter name
# from the Network Connections panel if you
# have more than one.  On XP SP2 or higher,
# you may need to selectively disable the
# Windows firewall for the TAP adapter.
# Non-Windows systems usually don't need this.
;dev-node MyTap

# SSL/TLS root certificate (ca), certificate
# (cert), and private key (key).  Each client
# and the server must have their own cert and
# key file.  The server and all clients will
# use the same ca file.
#
# See the "easy-rsa" directory for a series
# of scripts for generating RSA certificates
# and private keys.  Remember to use
# a unique Common Name for the server
# and each of the client certificates.
#
# Any X509 key management system can be used.
# OpenVPN can also use a PKCS #12 formatted key file
# (see "pkcs12" directive in man page).
ca /etc/openvpn/keys/ca.crt
cert /etc/openvpn/keys/server.crt
key /etc/openvpn/keys/server.key  # This file should be kept secret

# Diffie hellman parameters.
# Generate your own with:
#   openssl dhparam -out dh1024.pem 1024
# Substitute 2048 for 1024 if you are using
# 2048 bit keys. 
dh /etc/openvpn/keys/dh2048.pem

# Configure server mode and supply a VPN subnet
# for OpenVPN to draw client addresses from.
# The server will take 10.8.0.1 for itself,
# the rest will be made available to clients.
# Each client will be able to reach the server
# on 10.8.0.1. Comment this line out if you are
# ethernet bridging. See the man page for more info.
server 10.8.0.0 255.255.255.0

# Maintain a record of client <-> virtual IP address
# associations in this file.  If OpenVPN goes down or
# is restarted, reconnecting clients can be assigned
# the same virtual IP address from the pool that was
# previously assigned.
ifconfig-pool-persist ipp.txt

# Configure server mode for ethernet bridging.
# You must first use your OS's bridging capability
# to bridge the TAP interface with the ethernet
# NIC interface.  Then you must manually set the
# IP/netmask on the bridge interface, here we
# assume 10.8.0.4/255.255.255.0.  Finally we
# must set aside an IP range in this subnet
# (start=10.8.0.50 end=10.8.0.100) to allocate
# to connecting clients.  Leave this line commented
# out unless you are ethernet bridging.
;server-bridge 10.8.0.4 255.255.255.0 10.8.0.50 10.8.0.100

# Configure server mode for ethernet bridging
# using a DHCP-proxy, where clients talk
# to the OpenVPN server-side DHCP server
# to receive their IP address allocation
# and DNS server addresses.  You must first use
# your OS's bridging capability to bridge the TAP
# interface with the ethernet NIC interface.
# Note: this mode only works on clients (such as
# Windows), where the client-side TAP adapter is
# bound to a DHCP client.
;server-bridge

# Push routes to the client to allow it
# to reach other private subnets behind
# the server.  Remember that these
# private subnets will also need
# to know to route the OpenVPN client
# address pool (10.8.0.0/255.255.255.0)
# back to the OpenVPN server.
;push "route 192.168.10.0 255.255.255.0"
;push "route 192.168.20.0 255.255.255.0"

# To assign specific IP addresses to specific
# clients or if a connecting client has a private
# subnet behind it that should also have VPN access,
# use the subdirectory "ccd" for client-specific
# configuration files (see man page for more info).

# EXAMPLE: Suppose the client
# having the certificate common name "Thelonious"
# also has a small subnet behind his connecting
# machine, such as 192.168.40.128/255.255.255.248.
# First, uncomment out these lines:
;client-config-dir ccd
;route 192.168.40.128 255.255.255.248
# Then create a file ccd/Thelonious with this line:
#   iroute 192.168.40.128 255.255.255.248
# This will allow Thelonious' private subnet to
# access the VPN.  This example will only work
# if you are routing, not bridging, i.e. you are
# using "dev tun" and "server" directives.

# EXAMPLE: Suppose you want to give
# Thelonious a fixed VPN IP address of 10.9.0.1.
# First uncomment out these lines:
;client-config-dir ccd
;route 10.9.0.0 255.255.255.252
# Then add this line to ccd/Thelonious:
#   ifconfig-push 10.9.0.1 10.9.0.2

# Suppose that you want to enable different
# firewall access policies for different groups
# of clients.  There are two methods:
# (1) Run multiple OpenVPN daemons, one for each
#     group, and firewall the TUN/TAP interface
#     for each group/daemon appropriately.
# (2) (Advanced) Create a script to dynamically
#     modify the firewall in response to access
#     from different clients.  See man
#     page for more info on learn-address script.
;learn-address ./script

# If enabled, this directive will configure
# all clients to redirect their default
# network gateway through the VPN, causing
# all IP traffic such as web browsing and
# and DNS lookups to go through the VPN
# (The OpenVPN server machine may need to NAT
# or bridge the TUN/TAP interface to the internet
# in order for this to work properly).
;push "redirect-gateway def1 bypass-dhcp"

# Certain Windows-specific network settings
# can be pushed to clients, such as DNS
# or WINS server addresses.  CAVEAT:
# http://openvpn.net/faq.html#dhcpcaveats
# The addresses below refer to the public
# DNS servers provided by opendns.com.
;push "dhcp-option DNS 208.67.222.222"
;push "dhcp-option DNS 208.67.220.220"

# Uncomment this directive to allow different
# clients to be able to "see" each other.
# By default, clients will only see the server.
# To force clients to only see the server, you
# will also need to appropriately firewall the
# server's TUN/TAP interface.
client-to-client

# Uncomment this directive if multiple clients
# might connect with the same certificate/key
# files or common names.  This is recommended
# only for testing purposes.  For production use,
# each client should have its own certificate/key
# pair.
#
# IF YOU HAVE NOT GENERATED INDIVIDUAL
# CERTIFICATE/KEY PAIRS FOR EACH CLIENT,
# EACH HAVING ITS OWN UNIQUE "COMMON NAME",
# UNCOMMENT THIS LINE OUT.
;duplicate-cn

# The keepalive directive causes ping-like
# messages to be sent back and forth over
# the link so that each side knows when
# the other side has gone down.
# Ping every 10 seconds, assume that remote
# peer is down if no ping received during
# a 120 second time period.
keepalive 10 120

# For extra security beyond that provided
# by SSL/TLS, create an "HMAC firewall"
# to help block DoS attacks and UDP port flooding.
#
# Generate with:
#   openvpn --genkey --secret ta.key
#
# The server and each client must have
# a copy of this key.
# The second parameter should be '0'
# on the server and '1' on the clients.
tls-server
tls-auth /etc/openvpn/keys/ta.key 0 # This file is secret
tls-timeout 120
auth SHA1
# Select a cryptographic cipher.
# This config item must be copied to
# the client config file as well.
cipher BF-CBC        # Blowfish (default)
;cipher AES-128-CBC   # AES
;cipher DES-EDE3-CBC  # Triple-DES

# Enable compression on the VPN link.
# If you enable it here, you must also
# enable it in the client config file.
comp-lzo

# The maximum number of concurrently connected
# clients we want to allow.
max-clients 10

# It's a good idea to reduce the OpenVPN
# daemon's privileges after initialization.
#
# You can uncomment this out on
# non-Windows systems.
user nobody
group nogroup

# The persist options will try to avoid
# accessing certain resources on restart
# that may no longer be accessible because
# of the privilege downgrade.
persist-key
persist-tun

# Output a short status file showing
# current connections, truncated
# and rewritten every minute.
status openvpn-status.log

# By default, log messages will go to the syslog (or
# on Windows, if running as a service, they will go to
# the "\Program Files\OpenVPN\log" directory).
# Use log or log-append to override this default.
# "log" will truncate the log file on OpenVPN startup,
# while "log-append" will append to it.  Use one
# or the other (but not both).
log         /var/log/openvpn.log
;log-append  openvpn.log

# Set the appropriate level of log
# file verbosity.
#
# 0 is silent, except for fatal errors
# 4 is reasonable for general usage
# 5 and 6 can help to debug connection problems
# 9 is extremely verbose
verb 3

# Silence repeating messages.  At most 20
# sequential messages of the same message
# category will be output to the log.
mute 20
duplicate-cn
push "redirect-gateway def1"
push "dhcp-option DNS 8.8.8.8"
push "dhcp-option DNS 8.8.4.4"
topology subnet
mssfix

Написано более трёх лет назад

Ваш ответ на вопрос

Войдите, чтобы написать ответ

Похожие вопросы

OpenVPN

+1 ещё

Простой
Сервер на котором развёрнут OpenVPN видит клиента с родным IP адресом, а другие сервера и сайты с адресом сервера, как исправить?
- 1 подписчик
- 17 нояб.
- 118 просмотров
1

ответ
OpenVPN

+3 ещё

Простой
WAN pfSense — NAT — VPN — Outbound?
- 1 подписчик
- 16 нояб.
- 69 просмотров
0

ответов
OpenVPN

Простой
Что я настроил не так, pritunl?
- 1 подписчик
- 11 нояб.
- 78 просмотров
0

ответов
OpenVPN

+2 ещё

Простой
Как настроить доступ между устройствами клиентов при использовании OpenVPN?
- 1 подписчик
- 11 нояб.
- 97 просмотров
1

ответ
OpenVPN

Средний
Как в Ubuntu в OpenVPN решить проблему с cipher 'AES-256-CBC' in --data-ciphers?
- 1 подписчик
- 02 нояб.
- 138 просмотров
2

ответа
Сетевое администрирование

+2 ещё

Простой
Как обойти блокировку моего OpenVPN сервера другими сайтами?
- 1 подписчик
- 25 окт.
- 447 просмотров
3

ответа
Linux

+1 ещё

Средний
Возможно ли настроить OpenVPN сервер и PPTP client одновременно?
- 1 подписчик
- 22 окт.
- 115 просмотров
1

ответ
Mikrotik

+1 ещё

Сложный
Почему OpenVPN на MikroTik обрывает соединение с клиентом OpenVPN Connect после успешной проверки сертификатов?
- 1 подписчик
- 22 окт.
- 262 просмотра
1

ответ
Компьютерные сети

+1 ещё

Сложный
Перестают открываться сайты через OpenVPN?
- 1 подписчик
- 19 окт.
- 407 просмотров
1

ответ
VPN

+3 ещё

Средний
Сертификаты OpenVPN (EasyRSA, OpenSSL). Как они работают и в чем смысл их использования?
- 1 подписчик
- 18 окт.
- 288 просмотров
2

ответа
Показать ещё Загружается…

CTO / Tech Lead (продуктовый start-up категории Health & Fitness)

KOLSA

от 300 000 ₽

Преподаватель курса по информационной безопасности

Eltex • Новосибирск

от 130 000 ₽

Manual QA Engineer

Hoohah Barrel

от 50 000 до 80 000 ₽

Сверстать десктоп версию сайта в tailwind

22 нояб. 2024, в 06:06

1500 руб./в час

Создать TG бота

22 нояб. 2024, в 06:04

1 руб./за проект

Тестирование модуля ElasticSearch через ftp

22 нояб. 2024, в 03:54

1500 руб./за проект

Answer 1 · 2015-11-28 22:03:51

alegzz @alegzz

форвардинг включен? разрешен? NAT?

Ответ написан более трёх лет назад

6 комментариев

Answer 2 · 2015-11-28 09:45:30

Maksim @chumayu

Если в башне по*бень. То что еб*нь, что не еб*нь.

Что Вам говорят три буквы - NAT?

Ответ написан более трёх лет назад

5 комментариев

Answer 3 · 2015-11-28 08:57:01

client
dev tun
proto udp
remote hidevs.com 1194
ca ca.crt
cert client.crt
key client.key
tls-client
tls-auth ta.key 1
auth SHA1
cipher BF-CBC
comp-lzo
persist-key
persisr-tun
verb 3
redirect-gateway def1

Настройка OpenVPN на VPS?

Войдите, чтобы написать ответ

Минуточку внимания

Войдите на сайт