@MrSel
Изучаю все по немного. Живу в Пекине

Как скопировать карту RFID карту?

Здраствуйте, пытаюсь скопировать карту от комнаты на брелок, но никак не получается.
На рукай Proxmark3 Easy купленный в Китае
Вот такие данные при подключении показывает:
Данные о Proxmark
[ CLIENT ]
  [ Proxmark3 RFID instrument ]

    MCU....... AT91SAM7S512 Rev B
    Memory.... 512 KB ( 63% used )

    Client.... Iceman/master/v4.18341-152-g2bc7c5030 2024-05-09 18:44:19
    Bootrom... Iceman/master/v4.18341-152-g2bc7c5030-suspect 2024-04-27 11:42:48
    OS........ Iceman/master/v4.18341-152-g2bc7c5030-suspect 2024-04-27 11:43:01
    Target.... PM3 GENERIC


[=] No previous history could be loaded

hw status
[#] Memory
[#]   BigBuf_size............. 41500
[#]   Available memory........ 39192
[#] Tracing
[#]   tracing ................ 0
[#]   traceLen ............... 24535
[#] Current FPGA image
[#]   mode.................... fpga_pm3_hf.ncd image 2s30vq100 2024-02-03 15:12:20
[#] LF Sampling config
[#]   [q] divisor............. 95 ( 125.00 kHz )
[#]   [b] bits per sample..... 8
[#]   [d] decimation.......... 1
[#]   [a] averaging........... yes
[#]   [t] trigger threshold... 0
[#]   [s] samples to skip..... 0
[#]
[#] LF T55XX config
[#]            [r]               [a]   [b]   [c]   [d]   [e]   [f]   [g]
[#]            mode            |start|write|write|write| read|write|write
[#]                            | gap | gap |  0  |  1  | gap |  2  |  3
[#] ---------------------------+-----+-----+-----+-----+-----+-----+------
[#] fixed bit length (default) |  31 |  20 |  18 |  50 |  15 | n/a | n/a |
[#]     long leading reference |  31 |  20 |  18 |  50 |  15 | n/a | n/a |
[#]               leading zero |  31 |  20 |  18 |  40 |  15 | n/a | n/a |
[#]    1 of 4 coding reference |  31 |  20 |  18 |  34 |  15 |  50 |  66 |
[#]
[#] HF 14a config
[#]   [a] Anticol override.... std    ( follow standard )
[#]   [b] BCC override........ std    ( follow standard )
[#]   [2] CL2 override........ std    ( follow standard )
[#]   [3] CL3 override........ std    ( follow standard )
[#]   [r] RATS override....... std    ( follow standard )
[#] Transfer Speed
[#]   Sending packets to client...
[#]   Time elapsed................... 500ms
[#]   Bytes transferred.............. 246784
[#]   Transfer Speed PM3 -> Client... 493568 bytes/s
[#] Various
[#]   Max stack usage......... 5208 / 8480 bytes
[#]   Debug log level......... 1 ( error )
[#]   ToSendMax............... 75
[#]   ToSend BUFFERSIZE....... 2308
[#]   Slow clock.............. 31124 Hz
[#] Installed StandAlone Mode
[#]   LF HID26 standalone - aka SamyRun (Samy Kamkar)
[#]


Ниже оставлю еще выводы комманд
  • Вопрос задан
  • 123 просмотра
Пригласить эксперта
Ваш ответ на вопрос

Войдите, чтобы написать ответ

Войти через центр авторизации
Похожие вопросы