Переношу виртуальную машину с MacOS на Debian 9 без GUI. Установил на сервере VitrualBox и расширение для работы с RDP (Oracle_VM_VirtualBox_Extension_Pack-6.0.10-132072.vbox-extpack ).
Импортировал .ova-файл, запуск машины производится:
root:~/ # vboxmanage startvm "Debian 10" --type headless [14:46:39]
Waiting for VM "Debian 10" to power on...
VM "Debian 10" has been successfully started.
Но при подключении к серверу с iMac через RDP (Parallels Client), вижу просто черный экран с курсором. Если ввести некорректные логин-пароль, то также открывается черный экран с курсором. Т.е. вход в Debian в действительности не производится.
Тем не менее, при запуске # VBoxManage showvminfo 'Debian 10' вижу информацию о своем подключении:
VRDE Connection: active
Clients so far: 2
Start time: 2019/07/26 11:50:02 UTC
Sent: 27810Bytes
Average speed: 615B/s
Sent total: 27810Bytes
Received: 18849Bytes
Speed: 417B/s
Received total: 18849Bytes
User name: vsokolov
Domain:
Client name: Vitaly’s iMac
Client IP: 192.168.1.80
Client version: 3790
Encryption: RDP4
Вот вывод полностью:
Name: Debian 10
Groups: /
Guest OS: Debian (64-bit)
UUID: 4812351a-f969-4484-a0bb-37dc22a920a2
Config file: /root/VirtualBox VMs/Debian 10/Debian 10.vbox
Snapshot folder: /root/VirtualBox VMs/Debian 10/Snapshots
Log folder: /root/VirtualBox VMs/Debian 10/Logs
Hardware UUID: 4812351a-f969-4484-a0bb-37dc22a920a2
Memory size 2048MB
Page Fusion: disabled
VRAM size: 128MB
CPU exec cap: 100%
HPET: disabled
CPUProfile: host
Chipset: piix3
Firmware: BIOS
Number of CPUs: 1
PAE: disabled
Long Mode: enabled
Triple Fault Reset: disabled
APIC: enabled
X2APIC: enabled
Nested VT-x/AMD-V: disabled
CPUID Portability Level: 0
CPUID overrides: None
Boot menu mode: message and menu
Boot Device 1: Floppy
Boot Device 2: DVD
Boot Device 3: HardDisk
Boot Device 4: Not Assigned
ACPI: enabled
IOAPIC: enabled
BIOS APIC mode: APIC
Time offset: 0ms
RTC: UTC
Hardw. virt.ext: enabled
Nested Paging: enabled
Large Pages: enabled
VT-x VPID: enabled
VT-x unr. exec.: enabled
Paravirt. Provider: Default
Effective Paravirt. Prov.: KVM
State: running (since 2019-07-26T11:47:06.263000000)
Monitor count: 1
3D Acceleration: disabled
2D Video Acceleration: disabled
Teleporter Enabled: disabled
Teleporter Port: 0
Teleporter Address:
Teleporter Password:
Tracing Enabled: disabled
Allow Tracing to Access VM: disabled
Tracing Configuration:
Autostart Enabled: disabled
Autostart Delay: 0
Default Frontend:
Storage Controller Name (0): IDE
Storage Controller Type (0): PIIX4
Storage Controller Instance Number (0): 0
Storage Controller Max Port Count (0): 2
Storage Controller Port Count (0): 2
Storage Controller Bootable (0): on
Storage Controller Name (1): SATA
Storage Controller Type (1): IntelAhci
Storage Controller Instance Number (1): 0
Storage Controller Max Port Count (1): 30
Storage Controller Port Count (1): 1
Storage Controller Bootable (1): on
IDE (1, 0): Empty
SATA (0, 0): /root/VirtualBox VMs/Debian 10/Debian 10-disk001.vmdk (UUID: 68e0d246-b106-4c32-a636-6c78ccb77c58)
NIC 1: MAC: 0800########, Attachment: NAT, Cable connected: on, Trace: off (file: none), Type: 82540EM, Reported speed: 0 Mbps, Boot priority: 0, Promisc Policy: deny, Bandwidth group: none
NIC 1 Settings: MTU: 0, Socket (send: 64, receive: 64), TCP Window (send:64, receive: 64)
NIC 2: disabled
NIC 3: disabled
NIC 4: disabled
NIC 5: disabled
NIC 6: disabled
NIC 7: disabled
NIC 8: disabled
Pointing Device: USB Tablet
Keyboard Device: PS/2 Keyboard
UART 1: disabled
UART 2: disabled
UART 3: disabled
UART 4: disabled
LPT 1: disabled
LPT 2: disabled
Audio: enabled (Driver: ALSA, Controller: AC97, Codec: AD1980)
Audio playback: enabled
Audio capture: disabled
Clipboard Mode: Bidirectional
Drag and drop Mode: disabled
Session name: headless
Video mode: 720x400x0 at 0,0 enabled
VRDE: enabled (Address 0.0.0.0, Ports 3389, MultiConn: off, ReuseSingleConn: off, Authentication type: null)
VRDE port: 3389
Video redirection: disabled
VRDE property : TCP/Ports = "3389"
VRDE property : TCP/Address = <not set>
VRDE property : VideoChannel/Enabled = <not set>
VRDE property : VideoChannel/Quality = <not set>
VRDE property : VideoChannel/DownscaleProtection = <not set>
VRDE property : Client/DisableDisplay = <not set>
VRDE property : Client/DisableInput = <not set>
VRDE property : Client/DisableAudio = <not set>
VRDE property : Client/DisableUSB = <not set>
VRDE property : Client/DisableClipboard = <not set>
VRDE property : Client/DisableUpstreamAudio = <not set>
VRDE property : Client/DisableRDPDR = <not set>
VRDE property : H3DRedirect/Enabled = <not set>
VRDE property : Security/Method = <not set>
VRDE property : Security/ServerCertificate = <not set>
VRDE property : Security/ServerPrivateKey = <not set>
VRDE property : Security/CACertificate = <not set>
VRDE property : Audio/RateCorrectionMode = <not set>
VRDE property : Audio/LogPath = <not set>
OHCI USB: enabled
EHCI USB: disabled
xHCI USB: disabled
USB Device Filters:
<none>
Available remote USB devices:
<none>
Currently Attached USB Devices:
<none>
Bandwidth groups: <none>
Shared folders:<none>
VRDE Connection: active
Clients so far: 2
Start time: 2019/07/26 11:50:02 UTC
Sent: 27810Bytes
Average speed: 615B/s
Sent total: 27810Bytes
Received: 18849Bytes
Speed: 417B/s
Received total: 18849Bytes
User name: vsokolov
Domain:
Client name: Vitaly’s iMac
Client IP: 192.168.1.80
Client version: 3790
Encryption: RDP4
Capturing: not active
Capture audio: not active
Capture screens: 0
Capture file: /root/VirtualBox VMs/Debian 10/Debian 10.webm
Capture dimensions: 1024x768
Capture rate: 512kbps
Capture FPS: 25kbps
Capture options:
Guest:
Configured memory balloon size: 0MB
OS type: Debian_64
Additions run level: 0
Guest Facilities:
Facility "Seamless Mode": not active (last update: 2019/07/26 11:47:06 UTC)
Подскажите, куда копать? Проблема на клиенте или на сервере?
Средний
