Делал по похожим мануалам, но всегда похожая ошибка:
либо
danted.service: Failed to read PID from file /var/run/danted.pid: Invalid argument
Вот как я ставлю на чистую систему Debian 9_64:
apt-get update
apt-get upgrade
apt-get install build-essential libwrap0-dev libpam0g-dev libkrb5-dev libsasl2-dev
apt-get install dante-server
вот тут получаю
посмотретьReading package lists... Done
Building dependency tree
Reading state information... Done
The following NEW packages will be installed:
dante-server
0 upgraded, 1 newly installed, 0 to remove and 0 not upgraded.
Need to get 373 kB of archives.
After this operation, 993 kB of additional disk space will be used.
Get:1 http://ftp.uk.debian.org/debian stretch/main amd64 dante-server amd64 1.4.1+dfsg-5 [373 kB]
Fetched 373 kB in 0s (1600 kB/s)
apt-listchanges: Can't set locale; make sure $LC_* and $LANG are correct!
perl: warning: Setting locale failed.
perl: warning: Please check that your locale settings:
LANGUAGE = "en_GB:en",
LC_ALL = (unset),
LC_CTYPE = "ru_RU.UTF-8",
LANG = "en_GB.UTF-8"
are supported and installed on your system.
perl: warning: Falling back to a fallback locale ("en_GB.UTF-8").
locale: Cannot set LC_CTYPE to default locale: No such file or directory
locale: Cannot set LC_ALL to default locale: No such file or directory
Selecting previously unselected package dante-server.
(Reading database ... 45643 files and directories currently installed.)
Preparing to unpack .../dante-server_1.4.1+dfsg-5_amd64.deb ...
Unpacking dante-server (1.4.1+dfsg-5) ...
Processing triggers for systemd (232-25+deb9u3) ...
Setting up dante-server (1.4.1+dfsg-5) ...
Job for danted.service failed because the control process exited with error code.
See "systemctl status danted.service" and "journalctl -xe" for details.
invoke-rc.d: initscript danted, action "start" failed.
● danted.service - SOCKS (v4 and v5) proxy daemon (danted)
Loaded: loaded (/lib/systemd/system/danted.service; disabled; vendor preset: enabled)
Active: failed (Result: exit-code) since Sat 2018-04-21 11:21:54 BST; 16ms ago
Docs: man:danted(8)
man:danted.conf(5)
Process: 6893 ExecStart=/usr/sbin/danted -D (code=exited, status=1/FAILURE)
Process: 6887 ExecStartPre=/bin/sh -c uid=`sed -n -e "s/[[:space:]]//g" -e "s/#.*//" -e "/^user\.privileged/{s/[^:]*://p;q;}" /etc/danted.conf`; if [ -n "$uid" ]; then touch /var/run/danted.pid; chown $uid /var/run/danted.pid; fi (code=exited, status=0/SUCCESS)
Apr 21 11:21:54 admin systemd[1]: Starting SOCKS (v4 and v5) proxy daemon (danted)...
Apr 21 11:21:54 admin danted[6893]: Apr 21 11:21:54 (1524306114.152530) danted[6893]: warning: checkconfig(): no socks authentication methods enabled. This…not intended?
Apr 21 11:21:54 admin danted[6893]: Apr 21 11:21:54 (1524306114.153252) danted[6893]: error: checkconfig(): no internal address given for server to listen for clients on
Apr 21 11:21:54 admin danted[6893]: Apr 21 11:21:54 (1524306114.153766) danted[6893]: alert: mother[1/1]: shutting down
Apr 21 11:21:54 admin systemd[1]: danted.service: Control process exited, code=exited status=1
Apr 21 11:21:54 admin systemd[1]: Failed to start SOCKS (v4 and v5) proxy daemon (danted).
Apr 21 11:21:54 admin systemd[1]: danted.service: Unit entered failed state.
Apr 21 11:21:54 admin systemd[1]: danted.service: Failed with result 'exit-code'.
Hint: Some lines were ellipsized, use -l to show in full.
Please edit the Dante server config file /etc/danted.conf and specify at least the following directives: internal external
Processing triggers for man-db (2.7.6.1-2) ...
Processing triggers for systemd (232-25+deb9u3) ...
далее ставлю конфиг
nano /etc/danted.conf
вот такой
посмотреть
# $Id: sockd.conf,v 1.52.10.2 2014/09/03 14:49:13 michaels Exp $
logoutput: stderr
internal: eth0 port = 7077
external: eth0
socksmethod: username
user.privileged: root
user.unprivileged: nobody
client pass {
from: 0.0.0.0/0 port 1-65535 to: 0.0.0.0/0
log: error
socksmethod: username
}
socks pass {
from: 0.0.0.0/0 to: 0.0.0.0/0
command: bind connect udpassociate
log: error
socksmethod: username
}
socks pass {
from: 0.0.0.0/0 to: 0.0.0.0/0
command: bindreply udpreply
log: error
}
потом добавляю юзера
useradd -m sockduser && passwd sockduser
задаю пароль
service danted start
service danted status
получаю:
смотретьdanted.service - SOCKS (v4 and v5) proxy daemon (danted)
Loaded: loaded (/lib/systemd/system/danted.service; disabled; vendor preset: enabled)
Active: active (running) since Sat 2018-04-21 11:30:21 BST; 6s ago
Docs: man:danted(8)
man:danted.conf(5)
Process: 7153 ExecStart=/usr/sbin/danted -D (code=exited, status=0/SUCCESS)
Process: 7147 ExecStartPre=/bin/sh -c uid=`sed -n -e "s/[[:space:]]//g" -e "s/#.*//" -e "/^user\.privileged/{s/[^:]*://p;q;}" /etc/danted.conf`; if [ -n "$
Main PID: 7154 (danted)
Tasks: 20 (limit: 4915)
CGroup: /system.slice/danted.service
├─7154 /usr/sbin/danted -D
├─7155 danted: monitor-ch
├─7156 danted: negotiate-
├─7157 danted: request-ch
├─7158 danted: request-ch
├─7159 danted: request-ch
├─7160 danted: request-ch
├─7161 danted: request-ch
├─7162 danted: request-ch
├─7163 danted: request-ch
├─7164 danted: request-ch
├─7165 danted: request-ch
├─7166 danted: request-ch
├─7167 danted: request-ch
├─7168 danted: request-ch
├─7169 danted: request-ch
├─7170 danted: request-ch
├─7171 danted: request-ch
├─7172 danted: request-ch
└─7173 danted: io-child:
Apr 21 11:30:21 admin systemd[1]: Starting SOCKS (v4 and v5) proxy daemon (danted)...
Apr 21 11:30:21 admin systemd[1]: danted.service: Failed to read PID from file /var/run/danted.pid: Invalid argument
Apr 21 11:30:21 admin systemd[1]: Started SOCKS (v4 and v5) proxy daemon (danted).
тип протокола проверял
ip link show
spoiler
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN mode DEFAULT group default qlen 1
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP mode DEFAULT group default qlen 1000
link/ether 00:50:56:8f:20:1b brd ff:ff:ff:ff:ff:ff
3: eth1: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN mode DEFAULT group default qlen 1000
link/ether 00:50:56:8f:51:4c brd ff:ff:ff:ff:ff:ff
4: eth2: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN mode DEFAULT group default qlen 1000
link/ether 00:50:56:8f:0c:0b brd ff:ff:ff:ff:ff:ff
Заранее всем спасибо!
Средний
Сложный
Простой