Проблемы с igmp, Почему не срабатывает обновление счетчика?

Question

[Константин]

Проблемы с igmp , не срабатывает обновление счетчика (expire)
вот что говорит дебаг:
Inconsistent setting of Query Interval on Vlan406 with 0.0.0.0 (60 != 125)
IGMP(0): Received v3 Query on Vlan406 from 0.0.0.0
%IGMP-3-QUERY_INT_MISMATCH: Received a non-matching query interval 125, from querier address 0.0.0.0

#sh run int vlan406
interface Vlan406
description ***
ip address X.X.X.X X.X.X.X
ip pim sparse-mode
end
sh ip igmp int vlan406
Vlan406 is up, line protocol is up
Internet address is X.X.X.X/24
IGMP is enabled on interface
Current IGMP host version is 2
Current IGMP router version is 2
IGMP query interval is 125 seconds
IGMP configured query interval is 60 seconds
IGMP querier timeout is 120 seconds
IGMP configured querier timeout is 120 seconds
IGMP max query response time is 10 seconds
Last member query count is 2
Last member query response interval is 1000 ms
Inbound IGMP access group is not set
IGMP activity: 8635 joins, 8590 leaves
Multicast routing is enabled on interface
Multicast TTL threshold is 0
Multicast designated router (DR) is X.X.X.X (this system)
IGMP querying router is 0.0.0.0
Multicast groups joined by this system (number of users):
224.0.1.40(1)
IGMP snooping is globally enabled
IGMP snooping CGMP-AutoDetect is globally enabled
IGMP snooping is enabled on this interface
IGMP snooping fast-leave (for v2) is disabled
IGMP snooping querier is disabled.
IGMP snooping explicit-tracking is enabled
IGMP snooping last member query response interval is 1000 ms
IGMP snooping report-suppression is enabled
откуда он берет значение 125 и причем здесь v3 query