Задать вопрос
  • Перестал работать жёсткий диск Linux?

    @enarerer123 Автор вопроса
    xotkot,
    spoiler
    === START OF INFORMATION SECTION ===
    Model Family: Seagate BarraCuda 3.5 (SMR)
    Device Model: ST2000DM008-2FR102
    Serial Number: ZFL4J4B8
    LU WWN Device Id: 5 000c50 0dbca937e
    Firmware Version: 0001
    User Capacity: 2 000 398 934 016 bytes [2,00 TB]
    Sector Sizes: 512 bytes logical, 4096 bytes physical
    Rotation Rate: 7200 rpm
    Form Factor: 3.5 inches
    TRIM Command: Available
    Device is: In smartctl database 7.3/5319
    ATA Version is: ACS-3 T13/2161-D revision 5
    SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s)
    Local Time is: Tue Apr 18 15:25:30 2023 MSK
    SMART support is: Available - device has SMART capability.
    SMART support is: Enabled

    === START OF READ SMART DATA SECTION ===
    SMART overall-health self-assessment test result: PASSED

    General SMART Values:
    Offline data collection status: (0x00) Offline data collection activity
    was never started.
    Auto Offline Data Collection: Disabled.
    Self-test execution status: ( 0) The previous self-test routine completed
    without error or no self-test has ever
    been run.
    Total time to complete Offline
    data collection: ( 0) seconds.
    Offline data collection
    capabilities: (0x73) SMART execute Offline immediate.
    Auto Offline data collection on/off support.
    Suspend Offline collection upon new
    command.
    No Offline surface scan supported.
    Self-test supported.
    Conveyance Self-test supported.
    Selective Self-test supported.
    SMART capabilities: (0x0003) Saves SMART data before entering
    power-saving mode.
    Supports SMART auto save timer.
    Error logging capability: (0x01) Error logging supported.
    General Purpose Logging supported.
    Short self-test routine
    recommended polling time: ( 1) minutes.
    Extended self-test routine
    recommended polling time: ( 205) minutes.
    Conveyance self-test routine
    recommended polling time: ( 2) minutes.
    SCT capabilities: (0x30a5) SCT Status supported.
    SCT Data Table supported.

    SMART Attributes Data Structure revision number: 10
    Vendor Specific SMART Attributes with Thresholds:
    ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
    1 Raw_Read_Error_Rate 0x000f 080 064 006 Pre-fail Always - 111931528
    3 Spin_Up_Time 0x0003 098 098 000 Pre-fail Always - 0
    4 Start_Stop_Count 0x0032 099 099 020 Old_age Always - 1902
    5 Reallocated_Sector_Ct 0x0033 100 100 010 Pre-fail Always - 0
    7 Seek_Error_Rate 0x000f 083 060 045 Pre-fail Always - 208451805
    9 Power_On_Hours 0x0032 094 094 000 Old_age Always - 5404h+19m+58.192s
    10 Spin_Retry_Count 0x0013 100 100 097 Pre-fail Always - 0
    12 Power_Cycle_Count 0x0032 100 100 020 Old_age Always - 799
    183 Runtime_Bad_Block 0x0032 100 100 000 Old_age Always - 0
    184 End-to-End_Error 0x0032 100 100 099 Old_age Always - 0
    187 Reported_Uncorrect 0x0032 100 100 000 Old_age Always - 0
    188 Command_Timeout 0x0032 100 100 000 Old_age Always - 0 0 0
    189 High_Fly_Writes 0x003a 100 100 000 Old_age Always - 0
    190 Airflow_Temperature_Cel 0x0022 066 056 040 Old_age Always - 34 (Min/Max 26/34)
    191 G-Sense_Error_Rate 0x0032 100 100 000 Old_age Always - 0
    192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age Always - 83
    193 Load_Cycle_Count 0x0032 080 080 000 Old_age Always - 41911
    194 Temperature_Celsius 0x0022 034 044 000 Old_age Always - 34 (0 17 0 0 0)
    195 Hardware_ECC_Recovered 0x001a 080 064 000 Old_age Always - 111931528
    197 Current_Pending_Sector 0x0012 100 100 000 Old_age Always - 0
    198 Offline_Uncorrectable 0x0010 100 100 000 Old_age Offline - 0
    199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Always - 0
    240 Head_Flying_Hours 0x0000 100 253 000 Old_age Offline - 2931h+03m+55.534s
    241 Total_LBAs_Written 0x0000 100 253 000 Old_age Offline - 13384156923
    242 Total_LBAs_Read 0x0000 100 253 000 Old_age Offline - 27178688733

    SMART Error Log Version: 1
    No Errors Logged

    SMART Self-test log structure revision number 1
    No self-tests have been logged. [To run self-tests, use: smartctl -t]

    SMART Selective self-test log data structure revision number 1
    SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
    1 0 0 Not_testing
    2 0 0 Not_testing
    3 0 0 Not_testing
    4 0 0 Not_testing
    5 0 0 Not_testing
    Selective self-test flags (0x0):
    After scanning selected spans, do NOT read-scan remainder of disk.
    If Selective self-test is pending on power-up, resume after 0 minute delay.


    вот
  • Перестал работать жёсткий диск Linux?

    @enarerer123 Автор вопроса
    xotkot, что именно кидать? Весь огромный текст?
  • Перестал работать жёсткий диск Linux?

    @enarerer123 Автор вопроса
    Sand, смарт данные вроде бы в норме