Добрый день.
В наличие есть сервер под Debian 6.0 и контроллер Adaptec 3405, а также стопка SAS дисков которые необходимо проверить.
После подключения диска как Simple_volume, он появляется в системе как /dev/sdf
Как посмотреть его S.M.A.R.T?
smartctl -a -d scsi /dev/sdf
smartctl 5.40 2010-07-12 r3124 [x86_64-unknown-linux-gnu] (local build)
Copyright (C) 2002-10 by Bruce Allen, http://smartmontools.sourceforge.net
Device: Adaptec CLEAN Version: V1.0
scsiModePageOffset: response length too short, resp_len=4 offset=4 bd_len=0
>> Terminate command early due to bad response to IEC mode page
A mandatory SMART command failed: exiting. To continue, add one or more '-T permissive' options.
Как советуют в интернете: С помощью модуля sg можно обратиться непосредственно к жестким дискам на контроллере. Например, для первого жесткого диска:
smartctl -d scsi -a /dev/sg1
Устройств sg нет в системе
ls /dev/sg*
ls: cannot access /dev/sg*: No such file or directory
Как добраться до смарта?
на всякий случай вывод
arcconf GETCONFIG 1Controllers found: 1
----------------------------------------------------------------------
Controller information
----------------------------------------------------------------------
Controller Status : Optimal
Channel description : SAS/SATA
Controller Model : Adaptec 3405
Controller Serial Number : 9C411137CBC
Temperature : 49 C/ 120 F (Normal)
Installed memory : 128 MB
Copyback : Disabled
Background consistency check : Enabled
Automatic Failover : Enabled
Global task priority : Medium
Stayawake period : Disabled
Spinup limit internal drives : 0
Spinup limit external drives : 0
Defunct disk drive count : 0
Logical devices/Failed/Degraded : 1/0/0
--------------------------------------------------------
Controller Version Information
--------------------------------------------------------
BIOS : 5.2-0 (15728)
Firmware : 5.2-0 (15728)
Driver : 1.2-0 (28900)
Boot Flash : 5.2-0 (15728)
--------------------------------------------------------
Controller Battery Information
--------------------------------------------------------
Status : Not Installed
----------------------------------------------------------------------
Logical device information
----------------------------------------------------------------------
Logical device number 0
Logical device name : CLEAN
RAID level : Simple_volume
Status of logical device : Optimal
Size : 571382 MB
Read-cache mode : Enabled
Write-cache mode : Disabled (write-through)
Write-cache setting : Enabled (write-back) when protected by battery/ZMM
Partitioned : No
Protected by Hot-Spare : No
Bootable : Yes
Failed stripes : No
Power settings : Disabled
--------------------------------------------------------
Logical device segment information
--------------------------------------------------------
Segment 0 : Present (Controller:1,Connector:0,Device:2)
----------------------------------------------------------------------
Physical Device information
----------------------------------------------------------------------
Device #0
Device is a Hard drive
State : Online
Supported : Yes
Transfer Speed : SAS 3.0 Gb/s
Reported Channel,Device(T:L) : 0,2(2:0)
Reported Location : Connector 0, Device 2
Vendor : HITACHI
Model : HUS156060VLS600
Firmware : A5D0
World-wide name : 5000CCA02ACE2053
Size : 572325 MB
Write Cache : Enabled (write-back)
FRU : None
S.M.A.R.T. : No
S.M.A.R.T. warnings : 0
Command completed successfully.
Простой
