Задать вопрос
Cempl

Виктор Марквардт

Programmer
Комментарии

  • 3com (c16475) + cisco 2950, 3com не пропускает трафик cisco?

    Cempl
    @Cempl Автор вопроса
    Tr3m:

    kss204#sh mac-address
    Mac Address Table
    -------------------------------------------

    Vlan Mac Address Type Ports
    ---- ----------- -------- -----
    All 000e.d705.4a80 STATIC CPU
    All 0100.0ccc.cccc STATIC CPU
    All 0100.0ccc.cccd STATIC CPU
    All 0100.0cdd.dddd STATIC CPU
    1 e811.321b.458b DYNAMIC Fa0/15
    1 f8d1.1102.640c DYNAMIC Fa0/10
    Total Mac Addresses for this criterion: 6
    kss204#
    Написано

  • 3com (c16475) + cisco 2950, 3com не пропускает трафик cisco?

    Cempl
    @Cempl Автор вопроса
    Дмитрий Шицков: "навешиванием IP на интерфейсы менеджмента" то есть дать интерфейсам ip адреса? там чуть ниже в комментариях я бросил логи, посмотрите, может быть по ним будет видно в чем проблема.
    Написано

  • 3com (c16475) + cisco 2950, 3com не пропускает трафик cisco?

    Cempl
    @Cempl Автор вопроса
    Tr3m:

    kss204#sh run
    Building configuration...

    Current configuration : 1709 bytes
    !
    version 12.1
    no service pad
    service timestamps debug uptime
    service timestamps log uptime
    no service password-encryption
    !
    hostname kss204
    !
    enable secret 5 $1$Nty.$SU.Dd3j3UQfyhRTFhgOvU0
    !
    ip subnet-zero
    !
    !
    spanning-tree mode pvst
    no spanning-tree optimize bpdu transmission
    spanning-tree extend system-id
    !
    !
    interface FastEthernet0/1
    switchport mode access
    duplex full
    speed 100
    !
    interface FastEthernet0/2
    switchport mode access
    !
    interface FastEthernet0/3
    switchport mode access
    !
    interface FastEthernet0/4
    switchport mode access
    !
    interface FastEthernet0/5
    switchport mode access
    !
    interface FastEthernet0/6
    switchport mode access
    !
    interface FastEthernet0/7
    switchport mode access
    !
    interface FastEthernet0/8
    switchport mode access
    !
    interface FastEthernet0/9
    switchport mode access
    !
    interface FastEthernet0/10
    switchport mode access
    !
    interface FastEthernet0/11
    switchport mode access
    !
    interface FastEthernet0/12
    switchport mode access
    !
    interface FastEthernet0/13
    switchport mode access
    !
    interface FastEthernet0/14
    switchport mode access
    !
    interface FastEthernet0/15
    switchport mode access
    !
    interface FastEthernet0/16
    switchport mode access
    !
    interface FastEthernet0/17
    shutdown
    !
    interface FastEthernet0/18
    shutdown
    !
    interface FastEthernet0/19
    shutdown
    !
    interface FastEthernet0/20
    shutdown
    !
    interface FastEthernet0/21
    shutdown
    !
    interface FastEthernet0/22
    shutdown
    !
    interface FastEthernet0/23
    shutdown
    !
    interface FastEthernet0/24
    shutdown
    !
    interface Vlan1
    ip address 192.168.114.150 255.255.240.0
    no ip route-cache
    !
    ip default-gateway 192.168.112.1
    ip http server

    kss204#sh log
    Syslog logging: enabled (0 messages dropped, 0 messages rate-limited, 0 flushes, 0 overruns)
    Console logging: level debugging, 58 messages logged
    Monitor logging: level debugging, 0 messages logged
    Buffer logging: level debugging, 58 messages logged
    Exception Logging: size (4096 bytes)
    File logging: disabled
    Trap logging: level informational, 58 message lines logged

    Log Buffer (4096 bytes):
    N: Line protocol on Interface FastEthernet0/18, changed state to down
    00:00:20: %LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/19, changed state to down
    00:00:20: %LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/20, changed state to down
    00:00:20: %LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/21, changed state to down
    00:00:20: %LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/22, changed state to down
    00:00:20: %LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/23, changed state to down
    00:00:20: %LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/24, changed state to down
    00:00:21: %SPANTREE-7-RECV_1Q_NON_TRUNK: Received 802.1Q BPDU on non trunk FastEthernet0/1 VLAN1.
    00:00:21: %SPANTREE-7-BLOCK_PORT_TYPE: Blocking FastEthernet0/1 on VLAN0001. Inconsistent port type.
    00:00:21: %LINK-3-UPDOWN: Interface FastEthernet0/1, changed state to up
    00:00:21: %LINK-3-UPDOWN: Interface FastEthernet0/3, changed state to up
    00:00:21: %LINK-3-UPDOWN: Interface FastEthernet0/4, changed state to up
    00:00:21: %LINK-3-UPDOWN: Interface FastEthernet0/5, changed state to up
    00:00:21: %LINK-3-UPDOWN: Interface FastEthernet0/7, changed state to up
    00:00:21: %LINK-3-UPDOWN: Interface FastEthernet0/8, changed state to up
    00:00:21: %LINK-3-UPDOWN: Interface FastEthernet0/10, changed state to up
    00:00:21: %LINK-3-UPDOWN: Interface FastEthernet0/13, changed state to up
    00:00:22: %LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/1, changed state to up
    00:00:22: %LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/3, changed state to up
    00:00:22: %LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/4, changed state to up
    00:00:22: %LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/5, changed state to up
    00:00:22: %LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/7, changed state to up
    00:00:22: %LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/8, changed state to up
    00:00:22: %LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/10, changed state to up
    00:00:22: %LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/13, changed state to up
    00:00:35: %LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/10, changed state to down
    00:00:37: %LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/10, changed state to up
    00:00:50: %LINEPROTO-5-UPDOWN: Line protocol on Interface Vlan1, changed state to up
    00:03:38: %LINK-3-UPDOWN: Interface FastEthernet0/15, changed state to up
    00:03:39: %LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/15, changed state to up
    00:04:42: %LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/15, changed state to down
    00:04:43: %LINK-3-UPDOWN: Interface FastEthernet0/15, changed state to down
    00:04:46: %LINK-3-UPDOWN: Interface FastEthernet0/15, changed state to up
    00:04:47: %LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/15, changed state to up
    00:11:29: %LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/1, changed state to down
    00:11:32: %SPANTREE-2-RECV_PVID_ERR: Received BPDU with inconsistent peer vlan id 30 on FastEthernet0/1 VLAN1.
    00:11:32: %SPANTREE-2-BLOCK_PVID_LOCAL: Blocking FastEthernet0/1 on VLAN0001. Inconsistent local vlan.
    00:11:32: %LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/1, changed state to up
    00:11:34: %SYS-5-CONFIG_I: Configured from console by vty0 (192.168.114.109)
    00:15:20: %LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/1, changed state to down
    00:15:21: %LINK-3-UPDOWN: Interface FastEthernet0/1, changed state to down
    00:18:36: %SYS-5-CONFIG_I: Configured from console by vty0 (192.168.114.109)
    00:20:28: %SPANTREE-7-RECV_1Q_NON_TRUNK: Received 802.1Q BPDU on non trunk FastEthernet0/1 VLAN1.
    00:20:28: %SPANTREE-7-BLOCK_PORT_TYPE: Blocking FastEthernet0/1 on VLAN0001. Inconsistent port type.
    00:20:29: %LINK-3-UPDOWN: Interface FastEthernet0/1, changed state to up
    00:20:30: %LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/1, changed state to up
    kss204#

    kss204#sh mac-add table int Fa0/1
    ^
    % Invalid input detected at '^' marker.
    Написано

  • Как вытащить массив srting из Object?

    Cempl
    @Cempl Автор вопроса
    взять значение, к примеру если Object имя массива то Object[0] и так далее, но это не С++ и так не работает...
    Написано

  • 3com (c16475) + cisco 2950, 3com не пропускает трафик cisco?

    Cempl
    @Cempl Автор вопроса
    gateway недоступен, на всех машинах ip, шлюз, маска и прочее прописано в настройках, если на какой нибудь машине не прописано то она получает автоматом по dhcp. Перевел в access толку нету, gateway недоступен. При переводе 1 порта в access он постоянно горит оранжевым, при trunk зеленым. Если с 3com кабель включить в маршрутизатор, а с маршрутизатора в cisco то все работает отлично, видно всю сеть, но такой вариант на крайний случай оставил.
    Написано

  • 3com (c16475) + cisco 2950, 3com не пропускает трафик cisco?

    Cempl
    @Cempl Автор вопроса
    Виктор Марквардт: и еще нюанс, когда 1 порт в access то он горит оранжевым постоянно, а когда в trunk был то зеленым...
    Написано

  • 3com (c16475) + cisco 2950, 3com не пропускает трафик cisco?

    Cempl
    @Cempl Автор вопроса
    Дмитрий Шицков: возможно надо каким то образом прописать что бы все другие порты, ходили через 1, такое возможно? если да то подскажите как это сделать
    Написано

  • 3com (c16475) + cisco 2950, 3com не пропускает трафик cisco?

    Cempl
    @Cempl Автор вопроса
    Дмитрий Шицков: перевел его в access, потом copy run start, потом reload, ситуация та же...
    Написано

  • 3com (c16475) + cisco 2950, 3com не пропускает трафик cisco?

    Cempl
    @Cempl Автор вопроса
    3com неуправляемый
    Написано