plugin /etc/3proxy/TransparentPlugin.ld.so transparent_plugin
allow *
parent 1000 socks5 127.0.0.1 1080
transparent
tcppm 31281 127.0.0.1 31282
notransparent
flush
auth iponly
nserver 8.8.8.8/tcp
nscache 65536
allow *
parent 1000 socks5 127.0.0.1 1080
dnsprplugin /etc/3proxy/TransparentPlugin.ld.so transparent_plugin
allow *
parent 1000 socks5 127.0.0.1 1080
tcppm 31281 127.0.0.1 31282
flush
nserver 8.8.8.8/tcp
allow *
parent 1000 socks5 127.0.0.1 1080
dnspr -p12345 -i127.0.0.1flush
nserver 8.8.8.8/tcp
plugin /etc/3proxy/TransparentPlugin.ld.so transparent_plugin
allow *
parent 1000 socks5 127.0.0.1 10808
dnspr -p12345 -i127.0.0.1setgid <ваш gid>
setuid <ваш uid>
nserver 77.88.8.2
nserver 8.8.8.8
nscache 65536
timeouts 1 5 30 60 180 1800 15 60
daemon
log /var/log/3proxy/3proxy.log D
logformat "- +_L%t.%. %N.%p %E %U %C:%c %R:%r %O %I %h %T"
rotate 30
auth iponly
allow *
parent 1000 socks5 127.0.0.1 10808
plugin /etc/3proxy/TransparentPlugin.ld.so transparent_plugin
tcppm 31281 127.0.0.1 31282iptables -A PREROUTING -s 192.168.0.0/24 -p tcp -m multiport --dports 80,8080,443 -j REDIRECT --to-ports 31281xfs_repair -n /dev/sda
Phase 1 - find and verify superblock...
bad primary superblock - bad magic number !!!
attempting to find secondary superblock...
.found candidate secondary superblock...
superblock read failed, offset 3000589479936, size 131072, ag 3, rval -1
fatal error -- Input/output errorтак решение может зависеть и от результатов SMART
root@pve:~# smartctl -a /dev/sda
smartctl 7.2 2020-12-30 r5155 [x86_64-linux-5.11.22-1-pve] (local build)
Copyright (C) 2002-20, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Device Model: TOSHIBA DT02ABA400
Serial Number: 11S1S07US75H
LU WWN Device Id: 5 000039 a85615bb1
Firmware Version: KQ000A
User Capacity: 4,000,787,030,016 bytes [4.00 TB]
Sector Sizes: 512 bytes logical, 4096 bytes physical
Rotation Rate: 5400 rpm
Form Factor: 3.5 inches
Zoned Device: Device managed zones
Device is: Not in smartctl database [for details use: -P showall]
ATA Version is: ACS-3 T13/2161-D revision 5
SATA Version is: SATA 3.3, 6.0 Gb/s (current: 3.0 Gb/s)
Local Time is: Wed Oct 6 15:55:04 2021 +05
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x00) Offline data collection activity
was never started.
Auto Offline Data Collection: Disabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 120) seconds.
Offline data collection
capabilities: (0x5b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
No Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 517) minutes.
SCT capabilities: (0x003d) SCT Status supported.
SCT Error Recovery Control supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x000b 100 100 050 Pre-fail Always - 0
2 Throughput_Performance 0x0005 100 100 050 Pre-fail Offline - 0
3 Spin_Up_Time 0x0027 100 100 001 Pre-fail Always - 5877
4 Start_Stop_Count 0x0032 100 100 000 Old_age Always - 2
5 Reallocated_Sector_Ct 0x0033 100 100 050 Pre-fail Always - 485
7 Seek_Error_Rate 0x000b 100 100 050 Pre-fail Always - 0
8 Seek_Time_Performance 0x0005 100 100 050 Pre-fail Offline - 0
9 Power_On_Hours 0x0032 099 099 000 Old_age Always - 653
10 Spin_Retry_Count 0x0033 100 100 030 Pre-fail Always - 0
12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 1
191 G-Sense_Error_Rate 0x0032 100 100 000 Old_age Always - 0
192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age Always - 0
193 Load_Cycle_Count 0x0032 100 100 000 Old_age Always - 1297
194 Temperature_Celsius 0x0022 100 100 000 Old_age Always - 28 (Min/Max 20/34)
196 Reallocated_Event_Count 0x0032 100 100 000 Old_age Always - 485
197 Current_Pending_Sector 0x0032 100 100 000 Old_age Always - 16304
198 Offline_Uncorrectable 0x0030 100 100 000 Old_age Offline - 0
199 UDMA_CRC_Error_Count 0x0032 200 253 000 Old_age Always - 0
220 Disk_Shift 0x0002 100 100 000 Old_age Always - 0
222 Loaded_Hours 0x0032 100 100 000 Old_age Always - 43
223 Load_Retry_Count 0x0032 100 100 000 Old_age Always - 0
224 Load_Friction 0x0022 100 100 000 Old_age Always - 0
226 Load-in_Time 0x0026 100 100 000 Old_age Always - 860
240 Head_Flying_Hours 0x0001 100 100 001 Pre-fail Offline - 0
SMART Error Log Version: 1
No Errors Logged
SMART Self-test log structure revision number 1
No self-tests have been logged. [To run self-tests, use: smartctl -t]
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.