Задать вопрос
Ответы пользователя по тегу Cisco
  • Не работает VPN PPTP на Cisco 871 - какие я допустил ошибки?

    @whitensk Автор вопроса
    Ivan: Посмотрите новый конфиг
    version 15.0
    no service pad
    service timestamps debug datetime msec
    service timestamps log datetime msec
    service password-encryption
    service internal
    !
    hostname router-hma
    !
    boot-start-marker
    boot-end-marker
    !
    no logging buffered
    !
    no aaa new-model
    !
    crypto pki trustpoint TP-self-signed-2657071675
     enrollment selfsigned
     subject-name cn=IOS-Self-Signed-Certificate-2657071675
     revocation-check none
     rsakeypair TP-self-signed-2657071675
    !
    !
    dot11 syslog
    ip source-route
    no ip gratuitous-arps
    no ip dhcp use vrf connected
    ip dhcp excluded-address 192.168.1.1 192.168.1.210
    !
    ip dhcp pool LOCAL
       network 192.168.1.0 255.255.255.0
       default-router 192.168.1.100
       dns-server 193.238.131.93
    !
    !
    ip cef
    ip inspect WAAS flush-timeout 10
    ip domain name mydomain
    !
    !
    vpdn enable
    !
    vpdn-group 1
     description pptp
     request-dialin
      protocol pptp
      pool-member 1
     initiate-to ip<b> 176.116.153.18</b>
    !
    !
    !
    archive
     log config
      hidekeys
    !
    no spanning-tree vlan 1
    no spanning-tree vlan 2
    username LOGIN privilege 15 secret 5 $PASS
    username LOGIN privilege 15 password 7 PASS
    username LOGIN privilege 15 password 7 PASS
    !
    !
    ip ssh version 1
    !
    !
    !
    !
    !
    !
    !
    interface FastEthernet0
    !
    interface FastEthernet1
    !
    interface FastEthernet2
    !
    interface FastEthernet3
    !
    interface FastEthernet4
     description $ETH-WAN$
     ip address dhcp
     ip nat outside
     ip nat enable
     ip virtual-reassembly
     duplex auto
     speed auto
    !
    interface Vlan1
     description $ETH-SW-LAUNCH$$INTF-INFO-HWIC 4ESW$
     ip address 192.168.1.100 255.255.255.0
     ip nat inside
     ip nat enable
     ip virtual-reassembly
    !
    interface Dialer0
     mtu 1450
     ip address negotiated
     ip virtual-reassembly
     encapsulation ppp
     dialer pool 1
     dialer remote-name 123
     dialer idle-timeout 0
     dialer string 123
     dialer persistent
     dialer vpdn
     dialer-group 1
     ppp pfc local request
     ppp pfc remote apply
     ppp encrypt mppe auto
     ppp chap hostname LOGIN
     ppp chap password 7 PASS
     ppp ipcp dns request
     no cdp enable
    !
    ip default-gateway 192.168.1.100
    no ip forward-protocol nd
    ip http server
    ip http authentication local
    ip http secure-server
    !
    ip dns server
    ip nat inside source route-map nonat interface FastEthernet4 overload
    ip route 192.168.0.0 255.255.0.0 FastEthernet4 dhcp
    ip route 176.116.153.18 255.255.255.255 FastEthernet4 dhcp
    !
    ip access-list standard INSIDE_NAT
     permit 192.168.1.0 0.0.0.255
    !
    logging origin-id hostname
    logging server-arp
    access-list 23 permit 192.168.0.0 0.0.0.255
    dialer-list 1 protocol ip permit
    no cdp run
    
    !
    !
    !
    !
    control-plane
    !
    !
    line con 0
     logging synchronous
     no modem enable
    line aux 0
    line vty 0 4
     access-class 23 in
     exec-timeout 60 0
     privilege level 15
     password 7 PASS
     logging synchronous
     login local
     transport input ssh
    !
    scheduler max-task-time 5000
    ntp server 67.215.65.132
    ntp server 91.236.251.12
    end
    Ответ написан